TIPS (XIVO PIAF Noob) No Incoming Calls from any SIP working!

Lonnon Jensen

New Member
Joined
Jan 21, 2016
Messages
6
Reaction score
0
xivo%20sip%20network.png
[/URL][/IMG] I have a Raspberry Pi 3 and have the most current xivo build on it. I have a Trendnet router Running DDWRT, i have setup a GV simonics trunk setup and outgoing calls work great, but know matter what i do i cannot get incoming calls to work. So i thought maybe it was the simonics SIP so i decided to go the vitelity route got my number got it setup and the the vitelity shows it registered correctly so i was like great i will test it out now. And... it is a busy signal which means it is not reaching the Pi. is ther a port on the pi that needs to be opened or one on my router? From what i read from a post from ward mundy is to never open port 5060 unless bill gates is sending you a check every month. Any Help Would be Appreciated

xivo%20sip%20network.png

What Goes in the Local Network Spot? My default Gateway, My Pi address, Somethingelse entirely?
 
Last edited:

atsak

Guru
Joined
Sep 7, 2009
Messages
2,381
Reaction score
436
Normally you don't need to open anything on ddwrt routers - I've installed a couple over the years though not too many; tend to prefer Tomato these days.

For local network you put 192.168.x.x/24 or whatever your LAN (inside) network is.
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
19,170
Reaction score
5,199
Try taking both of those entries out. If that doesn't help, put your external IP address back in. I have yet to see a situation where both entries are required and actually work.

Also watch the Asterisk CLI during an incoming call and see what you see.
 

Lonnon

New Member
Joined
Sep 23, 2016
Messages
26
Reaction score
1
Update:

I had just the external ip put in, and now i can receive calls but when i answer they immediately drop the call to a busy tone. i put in my ip address of my server in the lan spot and when i do that i get no sound at all but the call does not drop

And thanks so much for the help guys.
 

Lonnon

New Member
Joined
Sep 23, 2016
Messages
26
Reaction score
1
Update:

I removed both entries and the vitelity works for incoming but hangs up immediatly the simonics will still not ring in goes to GV voicemail but i can call out on the Simonics line and everything works fine.
 

atsak

Guru
Joined
Sep 7, 2009
Messages
2,381
Reaction score
436
So my internal network is 10.10.10.x so do i put "10.10.10.1/24"?

Yes that's fine, (or well 10.10.10.0/24 is slightly more correct but it really doesn't matter). I'm assuming Xivo works like FreePBX did as well in terms of this field - I haven't had much time to play with it yet.
 

Lonnon Jensen

New Member
Joined
Jan 21, 2016
Messages
6
Reaction score
0
Ok ward i have removed all the entries and when i receive a call it hangs the call up for the one calling me and gives me a busy signal. Any ideas?
 

steven.ot

New Member
Joined
Nov 18, 2014
Messages
19
Reaction score
3
Update:

I removed both entries and the vitelity works for incoming but hangs up immediatly the simonics will still not ring in goes to GV voicemail but i can call out on the Simonics line and everything works fine.

I have nothing entered in the networking tab. No external IP or Local Network set. I also use Vitelity and can make outbound calls without issue. My Yealink T48G is exhibiting the same issue receiving calls though; they all go immediately to voicemail like the line is in use.

I have had success using both the Yate client softphone and setting up my Cisco SPA112 to convert our DECT pots phones over. The only phone in the house that fails to ring now, is the only one that is actually a SIP phone. :smilielol5:

To get into the asterisk cli you would want to SSH into your pi and use: (add one ore many V's for verbosity)
asterisk -vvvvvr

I do not know how many V's we would want/need to see what is going on during the call though.
 

Lonnon Jensen

New Member
Joined
Jan 21, 2016
Messages
6
Reaction score
0
Below is what i get when i receive a call.

[Sep 30 22:27:42] -- Stopped music on hold on SIP/vitel-inbound-00000008
[Sep 30 22:27:42] -- SIP/eeqzsogq-00000009 is ringing
[Sep 30 22:27:42] -- SIP/uyrlbcea-0000000a is ringing
[Sep 30 22:27:42] -- SIP/udgm0obu-0000000b is ringing
[Sep 30 22:27:50] == Extension Changed 701[default] new state InUse for Notify User udgm0obu
[Sep 30 22:27:50] -- SIP/uyrlbcea-0000000a connected line has changed. Saving it until answer for SIP/vitel-inbound-00000008
[Sep 30 22:27:50] -- SIP/uyrlbcea-0000000a answered SIP/vitel-inbound-00000008
[Sep 30 22:27:50] -- SIP/eeqzsogq-00000009 Internal Gosub(hangup_handlers,userevent,1) start
[Sep 30 22:27:50] -- Executing [userevent@hangup_handlers:1] NoOp("SIP/eeqzsogq-00000009", "Sending Hangup userevent") in new stack
[Sep 30 22:27:50] -- Executing [userevent@hangup_handlers:2] UserEvent("SIP/eeqzsogq-00000009", "Hangup,XIVO_USERUUID: d3ace6ed-6bbe-4b44-a068-0faeb1a917aa") in new stack
[Sep 30 22:27:50] -- Executing [userevent@hangup_handlers:3] Return("SIP/eeqzsogq-00000009", "") in new stack
[Sep 30 22:27:50] == Spawn extension (default, s, 1) exited non-zero on 'SIP/eeqzsogq-00000009'
[Sep 30 22:27:50] -- SIP/eeqzsogq-00000009 Internal Gosub(hangup_handlers,userevent,1) complete GOSUB_RETVAL=
[Sep 30 22:27:50] == Extension Changed 703[default] new state Idle for Notify User udgm0obu
[Sep 30 22:27:50] == Extension Changed 703[default] new state Idle for Notify User uyrlbcea
[Sep 30 22:27:50] -- SIP/udgm0obu-0000000b Internal Gosub(hangup_handlers,userevent,1) start
[Sep 30 22:27:50] -- Executing [userevent@hangup_handlers:1] NoOp("SIP/udgm0obu-0000000b", "Sending Hangup userevent") in new stack
[Sep 30 22:27:50] -- Executing [userevent@hangup_handlers:2] UserEvent("SIP/udgm0obu-0000000b", "Hangup,XIVO_USERUUID: 54318986-dd41-4c82-a358-22370d7ac8b2") in new stack
[Sep 30 22:27:50] -- Executing [userevent@hangup_handlers:3] Return("SIP/udgm0obu-0000000b", "") in new stack
[Sep 30 22:27:50] == Spawn extension (default, s, 1) exited non-zero on 'SIP/udgm0obu-0000000b'
[Sep 30 22:27:50] -- SIP/udgm0obu-0000000b Internal Gosub(hangup_handlers,userevent,1) complete GOSUB_RETVAL=
[Sep 30 22:27:50] == Extension Changed 702[default] new state Idle for Notify User uyrlbcea
[Sep 30 22:27:50] -- SIP/uyrlbcea-0000000a Internal Gosub(hangup_handlers,userevent,1) start
[Sep 30 22:27:50] -- Executing [userevent@hangup_handlers:1] NoOp("SIP/uyrlbcea-0000000a", "Sending Hangup userevent") in new stack
[Sep 30 22:27:50] -- Executing [userevent@hangup_handlers:2] UserEvent("SIP/uyrlbcea-0000000a", "Hangup,XIVO_USERUUID: 420239a0-6217-48ad-958b-11b0f139b5b4") in new stack
[Sep 30 22:27:50] -- Executing [userevent@hangup_handlers:3] Return("SIP/uyrlbcea-0000000a", "") in new stack
[Sep 30 22:27:50] == Spawn extension (default, s, 1) exited non-zero on 'SIP/uyrlbcea-0000000a'
[Sep 30 22:27:50] -- SIP/uyrlbcea-0000000a Internal Gosub(hangup_handlers,userevent,1) complete GOSUB_RETVAL=
[Sep 30 22:27:50] == Extension Changed 701[default] new state Idle for Notify User udgm0obu
[Sep 30 22:27:50] == Spawn extension (group, s, 19) exited non-zero on 'SIP/vitel-inbound-00000008'
 

Members online

Forum statistics

Threads
25,782
Messages
167,513
Members
19,203
Latest member
frapu
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top