Chris Wilson
New Member
- Joined
- Nov 20, 2016
- Messages
- 1
- Reaction score
- 0
Hello everyone,
I have installed Dahdi 2.11 and the latest Wanpipe drivers.
is it my understanding that the Sangoma U100 only works with Dahdi 2.5 and below?
I am getting the following output from dahdi_hardware:
driver should be 'wanpipe' but is actually 'sdlausb'
usb:002/004 wanpipe+ 10c4:8461 Sangoma WANPIPE USB-FXO Device
WARNING: Always run Incredible PBX behind a secure hardware-based firewall.
I'm trying to get my system to recognize the U100 without any success, and help would be appreciated.
I have installed Dahdi 2.11 and the latest Wanpipe drivers.
is it my understanding that the Sangoma U100 only works with Dahdi 2.5 and below?
I am getting the following output from dahdi_hardware:
driver should be 'wanpipe' but is actually 'sdlausb'
usb:002/004 wanpipe+ 10c4:8461 Sangoma WANPIPE USB-FXO Device
WARNING: Always run Incredible PBX behind a secure hardware-based firewall.
I'm trying to get my system to recognize the U100 without any success, and help would be appreciated.
Phone System 