Octothorpe
New Member
- Joined
- Dec 1, 2007
- Messages
- 1
- Reaction score
- 0
I followed the standard Nerd Vittles instructions to install Teleyapper 3.0 on my brand new PBX-in-a-flash system and it seems to crash immediately after the first goto in the dialplan. It the goto syntax different in pbx-in-a-flash than it was in trixbox 1.2.3 (It works great there). Below is a copy of the log file from my pbx-in-a-flash box:
I just tried this out on the new PBX-in a flash, and unfortunately all is not well. Things begin breaking as soon as it hits the first goto (Goto(yapper,s,1))
Below is a copy of the log from asterisk:
-- Executing [674@from-internal:1] Answer("SIP/201-08741010", "") in new stack
-- Executing [674@from-internal:2] Wait("SIP/201-08741010", "1") in new stack
-- Executing [674@from-internal:3] Authenticate("SIP/201-08741010", "911") in new stack
-- <SIP/201-08741010> Playing 'agent-pass' (language 'en')
-- <SIP/201-08741010> Playing 'auth-thankyou' (language 'en')
-- Executing [674@from-internal:4] Goto("SIP/201-08741010", "yapper|s|1") in new stack
-- Goto (yapper,s,1)
at this point I get a fast busy on the phone. Is this a known problem with PBX-in-a-Flash or should I look elsewhere?
I just tried this out on the new PBX-in a flash, and unfortunately all is not well. Things begin breaking as soon as it hits the first goto (Goto(yapper,s,1))
Below is a copy of the log from asterisk:
-- Executing [674@from-internal:1] Answer("SIP/201-08741010", "") in new stack
-- Executing [674@from-internal:2] Wait("SIP/201-08741010", "1") in new stack
-- Executing [674@from-internal:3] Authenticate("SIP/201-08741010", "911") in new stack
-- <SIP/201-08741010> Playing 'agent-pass' (language 'en')
-- <SIP/201-08741010> Playing 'auth-thankyou' (language 'en')
-- Executing [674@from-internal:4] Goto("SIP/201-08741010", "yapper|s|1") in new stack
-- Goto (yapper,s,1)
at this point I get a fast busy on the phone. Is this a known problem with PBX-in-a-Flash or should I look elsewhere?