Teleyapper 3.0

[Octothorpe]

I followed the standard Nerd Vittles instructions to install Teleyapper 3.0 on my brand new PBX-in-a-flash system and it seems to crash immediately after the first goto in the dialplan. It the goto syntax different in pbx-in-a-flash than it was in trixbox 1.2.3 (It works great there). Below is a copy of the log file from my pbx-in-a-flash box:

I just tried this out on the new PBX-in a flash, and unfortunately all is not well. Things begin breaking as soon as it hits the first goto (Goto(yapper,s,1))

Below is a copy of the log from asterisk:

-- Executing [674@from-internal:1] Answer("SIP/201-08741010", "") in new stack
-- Executing [674@from-internal:2] Wait("SIP/201-08741010", "1") in new stack
-- Executing [674@from-internal:3] Authenticate("SIP/201-08741010", "911") in new stack
-- <SIP/201-08741010> Playing 'agent-pass' (language 'en')
-- <SIP/201-08741010> Playing 'auth-thankyou' (language 'en')
-- Executing [674@from-internal:4] Goto("SIP/201-08741010", "yapper|s|1") in new stack
-- Goto (yapper,s,1)

at this point I get a fast busy on the phone. Is this a known problem with PBX-in-a-Flash or should I look elsewhere?

 

[wardmundy]

All of the Nerd Vittles applications were written for Asterisk 1.2. Trixbox 1.2.3 uses Asterisk 1.2. PBX in a Flash uses Asterisk 1.4. You'll just have to hang in there for a bit until we get the major applications rewritten. You can thank the Asterisk developers for trashing the old commands.

If there's an application that you absolutely must have today, then trixbox 1.2.3 still works reliably and should meet your short term needs. Just search Nerd Vittles for the links.