blanchae
Guru
- Joined
- Mar 12, 2008
- Messages
- 1,910
- Reaction score
- 9
I guess at this point, the question should be asked "What is a reasonable load on a PiaF server?" The testing so far has been pretty extreme at the baseline 20 cps (1200 calls per min) and up to 100 cps (6000 calls per min) for sequential calls.
The next step for testing is to start concurrent call testing to see what the maximum number of concurrent calls for a piece of hardware. I feel that this would give a better real world picture. So the next question is "what would be an acceptable scenerio for concurrent call testing?".
The next tests would require authentication and an audio payload of 20 seconds or so. I can test different codecs too.
Later I'll try transcoding from one codec to another.
The next step for testing is to start concurrent call testing to see what the maximum number of concurrent calls for a piece of hardware. I feel that this would give a better real world picture. So the next question is "what would be an acceptable scenerio for concurrent call testing?".
The next tests would require authentication and an audio payload of 20 seconds or so. I can test different codecs too.
Later I'll try transcoding from one codec to another.