[email protected]
Member
- Joined
- Feb 17, 2009
- Messages
- 35
- Reaction score
- 0
I am trying to get sip2sip trunks to work with no luck. I have set up a Nortel 1535 and Blink on sip2sip and they work fine.
When I do
pbx*CLI> sip show registry
Host dnsmgr Username Refresh State Reg.Time
sip2sip.info:5060 Y 2233492845 120 Request Sent
Any ideas would be helpful!
Here is my trunk settings:
username=22334xxxx
type=peer
canreinvite=yes
secret=xxxxx
qualify=yes
nat=yes
insecure=invite,port
host=81.23.228.150
dtmfmode=rfc2833
disallow=all
context=from-trunk
allow=ulaw&gsm&h263
outboundproxy=proxy.sipthor.net
Register String is
223349xxxx:[email protected]/22334xxxxx
When I do
pbx*CLI> sip show registry
Host dnsmgr Username Refresh State Reg.Time
sip2sip.info:5060 Y 2233492845 120 Request Sent
Any ideas would be helpful!
Here is my trunk settings:
username=22334xxxx
type=peer
canreinvite=yes
secret=xxxxx
qualify=yes
nat=yes
insecure=invite,port
host=81.23.228.150
dtmfmode=rfc2833
disallow=all
context=from-trunk
allow=ulaw&gsm&h263
outboundproxy=proxy.sipthor.net
Register String is
223349xxxx:[email protected]/22334xxxxx