AWAITING FEEDBACK sip2sip calls are rejected most of time

Discussion in 'Help' started by jrglass, Jul 19, 2014.

  1. jrglass

    jrglass Guru

    Joined:
    Oct 18, 2007
    Messages:
    286
    Likes Received:
    19
    I have sip2sip trunk and incoming route.There is an IPKALL number on it

    It is registered

    Host dnsmgr Username Refresh State Reg.Time
    sip2sip.info:5060 Y 2233XXXXXX 105 Registered Sat, 19 Jul 2014 22:58:23
    Most calls are rejected as in the attached file. Once in a while the call goes through
    Anyone have an idea?
    Thanks,
    Jeff
     

    Attached Files:

  2. wardmundy

    wardmundy Nerd Uno

    Joined:
    Oct 12, 2007
    Messages:
    14,281
    Likes Received:
    2,430
    Have you registered ALL of the sip2sip IP addresses??
     
  3. jrglass

    jrglass Guru

    Joined:
    Oct 18, 2007
    Messages:
    286
    Likes Received:
    19
    Yes,

    root@U140464:~# nslookup sip2sip.info | tail -2
    Address: 81.23.228.140

    ACCEPT udp -- 81.23.228.129 0.0.0.0/0 udp dpts:5060:5069
    ACCEPT udp -- 81.23.228.140 0.0.0.0/0 udp dpts:5060:5069
    ACCEPT udp -- 85.17.186.7 0.0.0.0/0 udp dpts:5060:5069
    ACCEPT udp -- 81.23.228.150 0.0.0.0/0 udp dpts:5060:5069

    Thanks,

    Jeff
     
  4. wardmundy

    wardmundy Nerd Uno

    Joined:
    Oct 12, 2007
    Messages:
    14,281
    Likes Received:
    2,430
    Did you set up SIP registrations, too?
     
  5. jrglass

    jrglass Guru

    Joined:
    Oct 18, 2007
    Messages:
    286
    Likes Received:
    19
    U140464*CLI> sip show registry
    Host dnsmgr Username Refresh State Reg.Time
    sip2sip.info:5060 Y 2233xxxxx 105 Registered Sun, 20 Jul 2014 22:55:17
    inbound34.vitelity.net:5060 Y xxx_main 45 Registered Sun, 20 Jul 2014 22:55:32
    chicago2.voip.ms:5060 Y 174xxx_xxx 105 Registered Sun, 20 Jul 2014 22:55:16
    3 SIP registrations

    Is this what you asked?
     
  6. wardmundy

    wardmundy Nerd Uno

    Joined:
    Oct 12, 2007
    Messages:
    14,281
    Likes Received:
    2,430
    I think you need a sip2sip trunk for every ip address.
     
  7. jrglass

    jrglass Guru

    Joined:
    Oct 18, 2007
    Messages:
    286
    Likes Received:
    19
    Thanks,

    I will try that
     
  8. jrglass

    jrglass Guru

    Joined:
    Oct 18, 2007
    Messages:
    286
    Likes Received:
    19
    That seemed to fix the problem

    Thanks,

    Jeff
     

Share This Page