Hi All,
it has been several years since I was last looking at VOIP PBX solutions and I am happy to be looking at it for my new company.
I followed Ward Mundys great intro (http://nerdvittles.com/?p=14183) and have setup the port forwarding from our hardware firewall and edited the iptables v4 rules to allow traffic from this IP, the trunk (to Aus ISP internode - my personal account - as a test) says status is established.
I then created outbound and inbound Routes following several guides on setting up these for other providers, but when I try to make an outgoing call, I get the following error:
[2015-10-08 10:25:52] ERROR[6275][C-0000000b]: pbx.c:4375 ast_func_write: Function CURLOPT not registered
The call tries to connect, if I put a pin on the outbound route, it asks for the pin, but eventually it times out and says that "the number is not answering" (on my Yate client I am using for testing)
I also get some warnings in the logs:
[2015-10-08 10:25:52] WARNING[1961]: func_cdr.c:349 cdr_write_callback: CDR requires a value (CDR(variable)=value)
[2015-10-08 10:25:53] WARNING[1961]: func_cdr.c:349 cdr_write_callback: CDR requires a value (CDR(variable)=value)
it has been several years since I was last looking at VOIP PBX solutions and I am happy to be looking at it for my new company.
I followed Ward Mundys great intro (http://nerdvittles.com/?p=14183) and have setup the port forwarding from our hardware firewall and edited the iptables v4 rules to allow traffic from this IP, the trunk (to Aus ISP internode - my personal account - as a test) says status is established.
I then created outbound and inbound Routes following several guides on setting up these for other providers, but when I try to make an outgoing call, I get the following error:
[2015-10-08 10:25:52] ERROR[6275][C-0000000b]: pbx.c:4375 ast_func_write: Function CURLOPT not registered
The call tries to connect, if I put a pin on the outbound route, it asks for the pin, but eventually it times out and says that "the number is not answering" (on my Yate client I am using for testing)
I also get some warnings in the logs:
[2015-10-08 10:25:52] WARNING[1961]: func_cdr.c:349 cdr_write_callback: CDR requires a value (CDR(variable)=value)
[2015-10-08 10:25:53] WARNING[1961]: func_cdr.c:349 cdr_write_callback: CDR requires a value (CDR(variable)=value)