RECOMMENDATIONS Preferred OS for Incredible PBX

[jaycos]

I came across this offer from n3servers and would like to use it as a production server for a small Incredible PBX installation. I have played around with a test installation using the Scientific Linux ISO with Vultr. It seems like n3 doesn't allow ISO installations. So I'm wondering which OS I should pick.

Any advice?

 

[Eliad]

I think Centos 6 64bit is your best choice because is the most mature, do not use Centos 7.

 

[David Foxworth]

Eliad's suggestion is a good one, however, Centos 6 64-bit uses outdated OpenSSL packages which don't support the new GVSIP. It requires installing the new OpenSSL packages and manipulating symlinks to compile Asterisk against. I never had much luck with that approach.

I was able to successfully install and compile Asterisk with GVSIP on Ubuntu 16.04 64-bit. I am using an OpenVZ container with a Linux 2.x kernel, so I am unable to upgrade to Ubuntu 18.04 at this time. However, Asterisk is working fine with FreePBX on Ubuntu 16.04 with Google Voice...

 

[wardmundy]

Eliad's suggestion is a good one, however, Centos 6 64-bit uses outdated OpenSSL packages which don't support the new GVSIP. It requires installing the new OpenSSL packages and manipulating symlinks to compile Asterisk against. I never had much luck with that approach.

FYI: Incredible PBX 13-13 for CentOS 6 and the Incredible PBX 13-13 ISO with SL 6 both include GVSIP and work just fine. We have numerous servers of our own running with no issues.

 

[jaycos]

FYI: Incredible PBX 13-13 for CentOS 6 and the Incredible PBX 13-13 ISO with SL 6 both include GVSIP and work just fine.

Glad to hear that. (How) Can I install Incredible PBX on SL 6 without the ISO?

 

[wardmundy]

Glad to hear that. (How) Can I install Incredible PBX on SL 6 without the ISO?

Sure. http://nerdvittles.com/?p=23948

 

[sergio305]

It would be good if you guys would do a start to Finsh video with all the details Full installation
The creation of the Google account the token everything I’m pretty sure it would clear up a lot of things for people

 

[Eliad]

I am not an IT professional , Ward wrote a very detail instructions you just have to follow them to the letter.
I am not sure video would work well, there are a lot of scripts to use in the install process. A written instruction allows easy copy and paste to the PBX server terminal.

 

[sergio305]

You’re absolutely right the Scripps are easy to copy I have a question when you get to the point where the Google tokens are given at step to that counter starts to run give you about 3600 seconds after that it expires during the time of it running I grab that key and I inputted into the script and I put my Phone number in there is a step three there do I do anything there or just close that window I also checked into my Google account and I do see the permission added for pbx do I do anything in that third step or just close it all out One more thing is there some type of debug mode that I can do to see why it’s not connecting I could never get it to connect I can ping the Internet from the consul

 

[sergio305]

If you give me a script of commands I could pop it into the consul and I could be bought this posted on here and maybe you guys can help me that way I would be very grateful

 

[Eliad]

When you follow the instruction to obtain Google voice token you will have to copy the Refresh_Token. it does not expire. Be careful and do it exactly as shown when you follow http://nerdvittles.com/?page_id=26328 . Any missteps will get you a non working token. When you enter the phone number you have to enter the phone number associated with the Refresh_Token.

 

[sergio305]

this is whats going on




IncrediblePBX*CLI> stun set debug on
STUN Debugging Enabled
IncrediblePBX*CLI>
[2018-09-10 19:29:45] DEBUG[2549]: res_pjsip_outbound_registration.c:2539 transport_from_endpoint_override: Setting transport to (nil)
[2018-09-10 19:29:45] DEBUG[2549]: res_pjsip.c:3072 ast_sip_dlg_set_transport: Overriding endpoint transport to use (nil)
[2018-09-10 19:29:45] DEBUG[2549]: res_pjsip_outbound_registration.c:2575 handle_outgoing_request: Found matching outbound registration state
[2018-09-10 19:29:45] WARNING[2546][C-00000003]: app_macro.c:321 _macro_exec: No such context 'macro-outisbusy' for macro 'outisbusy'. Was called by 7863186232@from-internal
[2018-09-10 19:29:45] WARNING[2546][C-00000003]: channel.c:5080 ast_prod: Prodding channel 'SIP/101-00000005' failed
IncrediblePBX*CLI>

any ideas

 

[sergio305]

Hey guys good morning quick update worked on this all last night finally got Google register had nothing to do with Google had the fax to do with something with my static IP I set it to DHCP and all of a sudden it starts to work the funny thing is that I can ping Google ping 8.8.8.8 No problem from the consul so that was weird I am able to get inbound calls no problem but I’m not able to make an outbound call it Gives me a busy signal I did my outbound route any pointers when you pointers on what to check on