dbaum
Guru
- Joined
- Jan 11, 2009
- Messages
- 124
- Reaction score
- 2
I recently had to rebuild my system on a second RentPBX virtual machine that I maintain as a spare.
Both are were supposed to be setup using Incredible PBX 12.0.70.
The machine that failed has a corrupted database and could not be recovered so I built the alternate machine from scratch.
I am noticing however that the console is seeing error messages that I had never seen on the previously working machine. Verbose level is set to 5 and was 5 on the previously working machine as well. The messages appear as the machine is reloading after APPLY CONFIG is pressed.
The messages are attached in a separate file.
I have also Core Set Verbose to 0 and pressed an APPLY CONFIG and the same errors display in the console.
My question is "Do I have a defective load on the currently active machine?" I hope not because the prospect of spending a week to build another is not pleasant.
Both are were supposed to be setup using Incredible PBX 12.0.70.
The machine that failed has a corrupted database and could not be recovered so I built the alternate machine from scratch.
I am noticing however that the console is seeing error messages that I had never seen on the previously working machine. Verbose level is set to 5 and was 5 on the previously working machine as well. The messages appear as the machine is reloading after APPLY CONFIG is pressed.
The messages are attached in a separate file.
I have also Core Set Verbose to 0 and pressed an APPLY CONFIG and the same errors display in the console.
My question is "Do I have a defective load on the currently active machine?" I hope not because the prospect of spending a week to build another is not pleasant.
Attachments
Last edited: