TIPS PIAF admin menu problem - please help

[rjm]

In the Admin menu, I am getting a button that says AMP administration where my PIAF maint menu used to hang out. When I select it, I get:
Forbidden

You don't have permission to access /admin/ on this server.


When I try to change the menu configuration I get:



Please set file access to allow writing for this feature to operate correctly!


Everything else seems to work correctly.



Can anyone PLEASE point me in the right direction with this? I have no idea what I did.



PBX in a Flash System Information*********************************************************************** 1. I agree that I will review the contents of the file ** /root/status-output.txt prior and redact any sensitive ** information prior to uploading the file to the PBX in a Flash ** forums. ** 2. I agree that I am wholly responsible for the editing of the file** /root/status-output.txt ** ** IF YOU DO NOT AGREE WITH THESE TERMS OF USE DO NOT USE THIS FILE ** ***********************************************************************Date and Time = 20101010 730PIAF color = SILVERAsterisk Status = ONLINEDahdi Status = ONLINEZaptel Status = OFFLINEMySql Status = ONLINESSH Status = ONLINEApache Status = ONLINEIptables Status = ONLINEIp6tables Status = ONLINEFail2ban Status = ONLINEIP Connect Status = ONLINEBluetooth Status = ONLINEHIDD Status = ONLINENTPD Status = ONLINESendmail Status = ONLINESamba Status = OFFLINEWebmin Status = ONLINEEthernet 0 Status = ONLINEEthernet 1 Status = N/AWlan Status = N/APIAF Version = 1.7.5.5Freepbx Version = 2.6.0.2Running Asterisk = [0;37;40mAsterisk 1.4.36Asterisk Source Version = 1.4.36Dahdi Source = 2.4.0+2.4.0Zaptel Source = UNAVAILABLELibpri Source = 1.4.11.4Addons Source = 1.4.11pbx.local on 192.168.1.10 - eth0CentOS release 5.5 (Final) :32 Bit Kernel: 2.6.18-194.8.1.el5********************************************************************Ifconfig outputeth0 Link encap:Ethernet HWaddr 90:FB:A6:85:CA:1E inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::92fb:a6ff:fe85:ca1e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:125207 errors:0 dropped:0 overruns:0 frame:0 TX packets:28839 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14021918 (13.3 MiB) TX bytes:11754842 (11.2 MiB) Interrupt:169 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:15866 errors:0 dropped:0 overruns:0 frame:0 TX packets:15866 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3800674 (3.6 MiB) TX bytes:3800674 (3.6 MiB) ********************************************************************Network Configuration output ifconfig-eth0# nVidia Corporation MCP79 EthernetDEVICE=eth0BOOTPROTO=noneHWADDR=90:fb:a6:85:ca:1eONBOOT=yesDHCP_HOSTNAME=pbx.localIPADDR=192.168.1.10NETMASK=255.255.255.0GATEWAY=192.168.1.1TYPE=Ethernet********************************************************************uname -a outputLinux pbx.local 2.6.18-194.8.1.el5 #1 SMP Thu Jul 1 19:07:06 EDT 2010 i686 i686 i386 GNU/Linux********************************************************************Routing Info - routeKernel IP routing tableDestination Gateway Genmask Flags Metric Ref Use Iface192.168.1.0 * 255.255.255.0 U 0 0 0 eth0169.254.0.0 * 255.255.0.0 U 0 0 0 eth0default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0********************************************************************Free Memory free -m output total used free shared buffers cachedMem: 883 355 527 0 28 224-/+ buffers/cache: 102 780Swap: 760 0 760********************************************************************Disk Info df outputFilesystem 1K-blocks Used Available Use% Mounted on/dev/sda2 150536772 2854660 139911876 2% //dev/sda1 101086 12374 83493 13% /boottmpfs 452312 0 452312 0% /dev/shm********************************************************************Output of hosts file# Do not remove the following line, or various programs# that require network functionality will fail.127.0.0.1 xxxx.dyndns.org pbx.local pbx localhost.localdomain localhost::1 localhost6.localdomain6 localhost6********************************************************************

 

[tm1000]

chown -R asterisk:asterisk /var/www/html
chmod -R 775 /var/www/html

 

[rjm]

chown -R asterisk:asterisk /var/www/html
chmod -R 775 /var/www/html

Thank you so much for your help. Unfortunately that didn't do it.

When I hit the admin switch, I get a password screen that doesn't like my password.

Tried passwd-master, restarting...

Would you happen to have any other ideas? I'm really stuck here...

 

[tm1000]

Thank you so much for your help. Unfortunately that didn't do it.

When I hit the admin switch, I get a password screen that doesn't like my password.

Tried passwd-master, restarting...

Would you happen to have any other ideas? I'm really stuck here...

Did you use the username 'maint' and your password? People get confused and either don't use a username or use admin. Those both won't work.

 

[rjm]

That's the odd part. It doesn't come up with the usual windows style login popup, it presents a web table style window that says password with a box. No matter what I put in there, it comes back bad password.

 

[tm1000]

That's the odd part. It doesn't come up with the usual windows style login popup, it presents a web table style window that says password with a box. No matter what I put in there, it comes back bad password.

Screen shot please.

 

[wardmundy]

The menu system appears to have gotten hosed. Don't guess you have a backup

You can download the menu system and start anew. Log into your server as root. Then...

cd /var/www/html
http://pbxinaflash.net/source/kennonsoft/menus.tar.gz
tar zxvf menus.tar.gz
rm menus.tar.gz

 

[rjm]

Sure I have a backup! I took it right after I did the fresh install....

Is there anything I can run to re-do the menu system?

 

[wardmundy]

see above.

 

[rjm]

Cool, thank you!!!!!!!!!!!

 

[rjm]

if you want to pm me an email, I'll send a shot.

 

[rjm]

Still have issues

The menu system appears to have gotten hosed. Don't guess you have a backup

You can download the menu system and start anew. Log into your server as root. Then...

cd /var/www/html
http://pbxinaflash.net/source/kennonsoft/menus.tar.gz
tar zxvf menus.tar.gz
rm menus.tar.gz

When I do something, I take great pride in doing it right....

.... and it looks like I hosed quite a bit more than the opening menus.

Did above, and thank you everyone. Unfortunately, when I hit the reappeared FreePBX Administration button, I get no login dialog box at all and I'm looking at a blank page.

Your recommendations Doctors?

Do we euthanize the patient or is there a newer procedure? The family and next of kin have been notified and will accept experimental procedures.

 

[wardmundy]

Sounds like it's time to start over.

 

[rjm]

That seems to be the general line of thinking.

I would like to thank everyone once again. I appreciate it.