strabuzano
New Member
- Joined
- Jun 3, 2009
- Messages
- 6
- Reaction score
- 0
I have 3 boxes running:
PIAF GOLD version 1.7.5.5
Freepbx version 2.9.0.12
Asterisk version 1.4.21.2
Zaptel 1.4.12.1.
And a R4FXO-EC Rhino card.
I have followed the instructions online and I have had no problems getting the paging using a sound card to work. I have changed my modules.conf:
load => chan_oss.so
and also made the following changes on
oss.conf :
autoanswer = yes
context = from-internal
overridecontext=yes
extension = s
language = en
playbackonly = yes
I have created a custom extension using console/dsp as the technology, and added that extension to a page group.
Everything works perfect.
Now I have been trying the same setup on exactly the same hardware and have tried every version of PIAF using DAHDI, and cannot get it to work.
My last setup is:
PIAF PURPLE Installed Version = 2.0.6.4 under *HARDWARE*
FreePBX Version = 2.10.0.2
Running Asterisk Version = 1.8.22.0
Asterisk Source Version = 1.8.22.0
Dahdi Source Version = 2.6.2
Libpri Source Version = 1.4.12
Operating System = CentOS release 6.4 (Final) <>
Kernel Version = 2.6.32-358.2.1.el6.i686 - 32 Bit
I have tested the sound using Flite and it works.
When I try to page there is no sound coming out.
Attached is the log from asterisk:
Any help is greatly appreciated.
Thank you.
PIAF GOLD version 1.7.5.5
Freepbx version 2.9.0.12
Asterisk version 1.4.21.2
Zaptel 1.4.12.1.
And a R4FXO-EC Rhino card.
I have followed the instructions online and I have had no problems getting the paging using a sound card to work. I have changed my modules.conf:
load => chan_oss.so
and also made the following changes on
oss.conf :
autoanswer = yes
context = from-internal
overridecontext=yes
extension = s
language = en
playbackonly = yes
I have created a custom extension using console/dsp as the technology, and added that extension to a page group.
Everything works perfect.
Now I have been trying the same setup on exactly the same hardware and have tried every version of PIAF using DAHDI, and cannot get it to work.
My last setup is:
PIAF PURPLE Installed Version = 2.0.6.4 under *HARDWARE*
FreePBX Version = 2.10.0.2
Running Asterisk Version = 1.8.22.0
Asterisk Source Version = 1.8.22.0
Dahdi Source Version = 2.6.2
Libpri Source Version = 1.4.12
Operating System = CentOS release 6.4 (Final) <>
Kernel Version = 2.6.32-358.2.1.el6.i686 - 32 Bit
I have tested the sound using Flite and it works.
When I try to page there is no sound coming out.
Attached is the log from asterisk:
Any help is greatly appreciated.
Thank you.