TIPS OSS Endpoint Manager on IncrediblePBX 16 (Howto)

rdoac

Member
Joined
Jun 29, 2014
Messages
35
Reaction score
2
Out of the box, endpoint manager is installed, but no menus are created.

This is version 14 of endpointman - version 13 will create menus.

Uninstall Version 14

From root / ssh

fwconsole ma remove endpointman

from the /root directory

cp gpl-install-contrib gpl-install-contrib-hack

Then edit it and change references of 15 to 13.

Make it executable and run it.

./gpl-install-contrib-hack endpointman

Refresh your admin page and you'll get menus again.

The YealinkV70 provisioner files are broken and can't be read - they will fail just after importing the T2x series of phones. Remove them, you can add YealinkV80 from the current developers github repository. I will post a howto if I get permission from him.
 

atsak

Guru
Joined
Sep 7, 2009
Messages
1,820
Reaction score
186
Then edit it and change references of 15 to 13.

Make it executable and run it.


Just to help make this a bit easier for all:
It's a bit of a vague pronoun here - edit what (ie what file)?
Make what executable and run it how?

And then where is the current developers github repository? I haven't noticed that was well recorded here elsewhere.

Many thanks.
 

rdoac

Member
Joined
Jun 29, 2014
Messages
35
Reaction score
2
Sorry, I plan(ned) to go back and redit this post with links after I get permission to publish someone else's github repo. You should be able to find it in this thread though.


The linux command above copied gpl-install-contrib to gpl-install-contrib-hack.

Then go to nano gpl-install-contrib-hack

Look for 15.0.zip and change it to 13.0.zip - there should be two lines - then also change release-15.0 to release-13.0

Save the file - and run it.

I was going to paste the code into here - but couldn't - (403 error).
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
15,221
Reaction score
2,662
Any User-Generated Content post[ed on GitHub] publicly, including issues, comments, and contributions to other Users' repositories, may be viewed by others. By setting your repositories to be viewed publicly, you agree to allow others to view and "fork" your repositories (this means that others may make their own copies of Content from your repositories in repositories they control).

If you set your pages and [GitHub] repositories to be viewed publicly, you grant each User of GitHub a nonexclusive, worldwide license to use, display, and perform Your Content through the GitHub Service and to reproduce Your Content solely on GitHub as permitted through GitHub's functionality (for example, through forking). You may grant further rights if you adopt a license. If you are uploading Content you did not create or own, you are responsible for ensuring that the Content you upload is licensed under terms that grant these permissions to other GitHub Users.
 

rdoac

Member
Joined
Jun 29, 2014
Messages
35
Reaction score
2
Ok - good to know.

I downloaded matthias's provisioner scripts from:


git clone https://github.com/matthias1232/Provisioner

Then found Provisioner/endpoint/yealinkv80

Edited the y0000000000$suffix.cfg files in t2x and t4x to change language back to English.

Then from the endpoint directory:

tar zcvf yealinkv80.tgz yealinkv80

(I did this on my development machine - not on my pbx)

will create a tar.gz archive, which can then be uploaded under epm, advanced, package import/export and uploaded it as a device archive. I was then able to provision my T46 phones.
 

atsak

Guru
Joined
Sep 7, 2009
Messages
1,820
Reaction score
186
This is actually pretty important - support for the Yealink newer models is very useful, so the ability to have a clear and concise instruction set for setting it up on OSS EPM would be most helpful (BTW this is enough information for me to do it, but I think maybe a bit terse for others; Ward might well be able to write it into the Incredible PBX setup script?)
 

rdoac

Member
Joined
Jun 29, 2014
Messages
35
Reaction score
2
I put my edited Yealink V80 files here. These are the same as the gihub repository above, but I made a few changes to the configuration, changing it from French to English and turning key tones back on. I also removed the first part of the URL for background images, so you can put a full domain and path into the template to pull your background.
 
  • Love
Reactions: wardmundy

Members online

PIAF 5 - Powered by 3CX

Forum statistics

Threads
22,441
Messages
137,941
Members
14,611
Latest member
rampageai