TIPS One way audio

shetu

Member
Joined
Nov 28, 2014
Messages
136
Reaction score
10
Hello
I install chan dongle (Asterisk 13.23.1, Huweai e1550, firmware 11.609.20.03.356).
Codec uLaw, g722, gsm
I run traffic capture at Wireshark and it shows RTP send receive both way. But other caller dose not hear anything.

upload_2019-1-28_23-42-6.png
 

AndyInNYC

Active Member
Joined
May 23, 2013
Messages
772
Reaction score
124
One way audio is almost always a fault of NAT.
1. Make sure you have NAT as yes for the extension.
2. Make sure you have SIP ALG disabled on any routers

Good luck.
 

shetu

Member
Joined
Nov 28, 2014
Messages
136
Reaction score
10
Hi
This was from lan. Pbx server and extention are same netwook. I use pfsense router and i think there are no sip alg.
 

chris_c_

Active Member
Joined
Aug 19, 2010
Messages
509
Reaction score
67
Hi
This was from lan. Pbx server and extention are same netwook. I use pfsense router and i think there are no sip alg.
Try these, one at a time, and report back your results:
1. Enable only uLaw and aLaw codecs (on the Extension and Asterisk SIP Settings). https://wiki.freepbx.org/display/PHON/Codecs
2. Enable all the codecs (on the Extension and Asterisk SIP Settings).
3. Enable STUN (on Extension and Asterisk SIP Settings) and set STUN server to stun.counterpath.net and the default port is 3478.
4. Check your Asterisk SIP Settings, make sure they're sensible:
https://wiki.freepbx.org/display/FPG/Asterisk+SIP+Settings+User+Guide
 

shetu

Member
Joined
Nov 28, 2014
Messages
136
Reaction score
10
1. Enable only uLaw and aLaw codecs (on the Extension and Asterisk SIP Settings).
Same Caller not hear my voice. Here is my wirshark file
2. Enable all the codecs (on the Extension and Asterisk SIP Settings). (Except slin - Huge noise)
Same Caller not hear my voice. Wireshark file
3. I use yate pc client. I did not find stun option for this.

Note : there are no dahdi module.

NAT Settings
External Address : Public IP
Local Networks : LAN - 192.244.11.0/24
Host PC Windos xp (192.244.11.1), VMware 7 - (pbx server 192.244.11.11)​

RTP Port : 10000-20000
RTP Checksums : Yes
Strict RTP : Yes
Chain Sip Settings : NAT - Yes / IP Configaration - Public IP
Reinvite Behavior : no
RTP Timeout : 30
RTP Hold Timeout : 300
RTP Keep Alive : 0
Other SIP Settings : match_auth_username=yes / accept_outofcall_message=yes / outofcall_message_context=sip-message / auth_message_requests= no

Entention 706
DTMF Signaling RFC 2833
Qualify - Yes
Can Reinvite - NO
 
Last edited:

Members online

Forum statistics

Threads
25,778
Messages
167,504
Members
19,198
Latest member
serhii
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top