drew horgan
New Member
- Joined
- Nov 23, 2013
- Messages
- 3
- Reaction score
- 0
Hi Folks
Just built a shiny new PIAF green/incredible pbx/travellin man3 box to replace my old trixbox unit
All seems to be working fine except inbound calls which do not repond
Here are my trunk inbound settings
type=peer
context=from-trunk
dtmfmode=RFC2833
# port=5060
# insecure=very
# dtmfmode=rfc2833
# disallow=all
# canreinvite=no
allow=ulaw
allowguest=no
alwaysauthreject=yes
These are the same settings as the trixbox
Ports 5060, 10000-20000 have been forwarded to the PIAF server
Router logfiles show that the inbound traffic has been accepted and routed to the PIAF IP addy
Asterisk logfiles in PIAF show nothing
Oddly enough, if I fire up the trixbox, it answers the calls even though it is a different IP address
This is driving me batty....Any suggestions to steer me on the right track?
Cheers
Just built a shiny new PIAF green/incredible pbx/travellin man3 box to replace my old trixbox unit
All seems to be working fine except inbound calls which do not repond
Here are my trunk inbound settings
type=peer
context=from-trunk
dtmfmode=RFC2833
# port=5060
# insecure=very
# dtmfmode=rfc2833
# disallow=all
# canreinvite=no
allow=ulaw
allowguest=no
alwaysauthreject=yes
These are the same settings as the trixbox
Ports 5060, 10000-20000 have been forwarded to the PIAF server
Router logfiles show that the inbound traffic has been accepted and routed to the PIAF IP addy
Asterisk logfiles in PIAF show nothing
Oddly enough, if I fire up the trixbox, it answers the calls even though it is a different IP address
This is driving me batty....Any suggestions to steer me on the right track?
Cheers