Dejan
New Member
- Joined
- Dec 16, 2017
- Messages
- 7
- Reaction score
- 0
Right now. In my home network there is an ISP router with built-in WIFI (ATT 2WIRE) which has IP address 192.168.0.1 - firewall - PBX box.
Now I have a static IP address 12.34.54.78 which through the ISP router I directly carry it to the WAN firewall (without a firewall limit and without NAT). LAN on a firewall with address 192.168.1.1-254. Here I have set Firewall Rules - Port Forwarding:
5060-5070 to destination 192.168.1.100 (PBX Box IP)
and
10000-20000 to destination 192.168.1.100 (PBX Box IP).
When I am connected via WIFI Zoiper is registered on the PBX box, but when I turn off the WIFI on my phone then I can not register on the PBX box.
I use my static IP address as a connection address.
HELP how to do from outside ???
Now I have a static IP address 12.34.54.78 which through the ISP router I directly carry it to the WAN firewall (without a firewall limit and without NAT). LAN on a firewall with address 192.168.1.1-254. Here I have set Firewall Rules - Port Forwarding:
5060-5070 to destination 192.168.1.100 (PBX Box IP)
and
10000-20000 to destination 192.168.1.100 (PBX Box IP).
When I am connected via WIFI Zoiper is registered on the PBX box, but when I turn off the WIFI on my phone then I can not register on the PBX box.
I use my static IP address as a connection address.
HELP how to do from outside ???