Trimline2
Guru
- Joined
- May 23, 2013
- Messages
- 524
- Reaction score
- 96
Ward:
I reran the installation after ensuring the IP addresses in the ifconfig matched the main IP address on the console. This ran through fine and stopped on the port knocker step.
I couldn't login to the admin via the GUI, as there was no display. I located something similar and entered : mv /var/www/html/index_custom.php /var/www/html/index_custom.booboo.php - This corrected my issue. A full screen appeared, which was nice, but I couldn't login as I didn't know the password.
I followed the instructions here to set it to NULL - http://wiki.freepbx.org/display/L1/amportal+commands . Another issue I had was that the admin-pw-change script referred to our friend eth0. I copied that to admin-pw-change2 and replaced eth0 with venet0. This worked; the Admin password has been changed.
I'll keep poking around and keep you updated.
Thanks for the jump start here!
I reran the installation after ensuring the IP addresses in the ifconfig matched the main IP address on the console. This ran through fine and stopped on the port knocker step.
I couldn't login to the admin via the GUI, as there was no display. I located something similar and entered : mv /var/www/html/index_custom.php /var/www/html/index_custom.booboo.php - This corrected my issue. A full screen appeared, which was nice, but I couldn't login as I didn't know the password.
I followed the instructions here to set it to NULL - http://wiki.freepbx.org/display/L1/amportal+commands . Another issue I had was that the admin-pw-change script referred to our friend eth0. I copied that to admin-pw-change2 and replaced eth0 with venet0. This worked; the Admin password has been changed.
I'll keep poking around and keep you updated.
Thanks for the jump start here!