FOOD FOR THOUGHT IP Systems LTD Hosting

kenn10

A lesser geek
Joined
Dec 16, 2007
Messages
926
Reaction score
167
Price looks OK but they don't come with much memory or storage.
 

Trimline2

Guru
Joined
May 23, 2013
Messages
525
Reaction score
95
Location
Orlando, FL
I signed up - it's Centos 6.5. First pass installation failed with all sorts of issues, including they use not ETHO but VNET0 and Asterisk did not compile. Any suggestions on which install to use? I do have to admit, the system is really zippy and located in DFW (I got the 12$ variety for the extra memory and space).
 

Trimline2

Guru
Joined
May 23, 2013
Messages
525
Reaction score
95
Location
Orlando, FL
I'm a stuck muck in
sed -i 's|quiet|quiet net.ifnames=0 biosdevdame=0|' /etc/default/grub
grub2-mkconfig -o /boot/grub2/grub.cfg

Went ahead anyway, and it bombed on IncrediblePBX11.sh: line 778: unexpected EOF while looking for matching `"' - which does make sense as the system does not have eth0 but venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:my.ip.address.218 - - the status did not show private/public IP addy.

How did you get around the eth0 issue?
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
15,083
Reaction score
2,602
Don't worry about grub. Its harmless. What's the problem with venet?? Works just as well as eth0 for me.
 
Joined
Apr 8, 2015
Messages
40
Reaction score
13
Trimline2 - I too had issues with eth0 after following this CentOS 6.5 tutorial on CentOS 6.5 64-bit through CloudAtCost. After issuing the reboot command following "./update-kernel-devel" the server would boot however I'd be unable to connect through SSH. Upon further investigation I discovered that I could only connect through the CloudAtCost Panel Console and after connecting it appeared to have no external network connectivity.

I tried re-imaging a few times and was never able to get around it. After much trial and error, I discovered that the following methods of getting Incredible PBX installed did work for me:
  1. Forget CentOS and use the Ubuntu 14.04 Docker image following this guide: http://nerdvittles.com/?p=9713
    1. While this worked, I did have to enable root login by issuing these commands
      1. Log in as [email protected]
      2. enter "su" and enter your password
      3. enter the command "nano /etc/ssh/sshd_config"
      4. change "PermitRootLogin without-password" to "PermitRootLogin yes"
      5. enter the command "sudo service ssh restart"
      6. reconnect as root and then follow the steps outlined in the guide linked above
  2. If you want to stick with CentOS, this tutorial worked great: http://blog.ls20.com/install-pbx-in-a-flash-piaf-on-digitalocean/
  3. Or, if you want to stick with CentOS I also had luck by first installing PBX In a Flash (Green) then installing IncrediblePBX following this guide: http://nerdvittles.com/?p=9526
    1. While this worked, it left me with only 4GB of free disk space out of 10GB so I wouldn't recommend it if you're partitioning disks at 10GB
Its possible I was doing something wrong by following the standard CentOS Guide linked above, but since our issues sound similar I hope my learnings get you moving again. Good luck! :thumbsup:
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
15,083
Reaction score
2,602
You're skipping these 2 steps. And doing everything else by the tutorial. Correct??
Code:
sed -i 's|quiet|quiet net.ifnames=0 biosdevdame=0|' /etc/default/grub
grub2-mkconfig -o /boot/grub2/grub.cfg
And you started with CentOS 6.5 (64-bit) platform, not the default platform. Correct??

Not sure why it would work for me and fail for anybody else.

After going through the fax install after the initial install, I did lose DNS. Fixed that by adding the following to /etc/resolv.conf and chattr +i /etc/resolv.conf:
Code:
nameserver 8.8.8.8
Just to recap, here are the steps that worked for me:
Code:
setenforce 0
yum -y upgrade
yum -y install net-tools nano wget
wget http://incrediblepbx.com/update-kernel-devel
chmod +x update-kernel-devel
./update-kernel-devel
reboot
 
cd /root
wget http://incrediblepbx.com/incrediblepbx11.4.centos.tar.gz
tar zxvf incrediblepbx*
./IncrediblePBX*
 

Trimline2

Guru
Joined
May 23, 2013
Messages
525
Reaction score
95
Location
Orlando, FL
Yes, I'm CentOS 6.5 64 Bit (Not CentOS 7 64 Bit Minimal) - I am rerunning the install from the top. We'll see what Monday brings. Thanks.

On a side note, here's a good reason to lock down your server:
Last failed login: Mon May 11 06:43:37 EDT 2015 from 211.154.6.101 on ssh:notty
There were 410 failed login attempts since the last successful login.
 

Trimline2

Guru
Joined
May 23, 2013
Messages
525
Reaction score
95
Location
Orlando, FL
Reran the installalation, and stalled again (perhaps we should make a new thread on this vendor):

Code:
HTTP request sent, awaiting response... 200 OK
Length: 32616 (32K) [text/plain]
Saving to: `knock-server-0.5-7.el6.nux.x86_64.rpm'

100%[============================================================================================================================================================>] 32,616      --.-K/s   in 0.04s

2015-05-11 07:50:37 (756 KB/s) - `knock-server-0.5-7.el6.nux.x86_64.rpm' saved [32616/32616]

warning: knock-server-0.5-7.el6.nux.x86_64.rpm: Header V4 RSA/SHA1 Signature, key ID 85c6cd8a: NOKEY
Preparing...                ########################################### [100%]
   1:knock-server           ########################################### [100%]
Starting knockd: could not open eth0: eth0: No such device exists (SIOCGIFHWADDR: No such device)
                                                           [FAILED]
Successfully reloaded

./IncrediblePBX11.sh: line 778: unexpected EOF while looking for matching `"'
./IncrediblePBX11.sh: line 779: syntax error: unexpected end of file
[[email protected] ~]#
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
15,083
Reaction score
2,602
The end-of-file error is some bash quirk. That really is the end of the script so it's nothing to worry about.

The knock server issue will have to be addressed since it does look for eth0. Anything else I've missed??
 

Trimline2

Guru
Joined
May 23, 2013
Messages
525
Reaction score
95
Location
Orlando, FL
Hmmm. Can't login to the system. (Nothing appears in the browser going to my IP address) Still hitting the ETHO issue:

Code:
/admin-pw-change
This script changes your admin password for FreePBX 2.11 access.

Enter new admin password (MAKE IT SECURE!!): NewPass

admin password will be changed to: NewPass
Press ENTER key to continue or Ctrl-C to abort...

eth0: error fetching interface information: Device not found
Done. Use browser to access FreePBX at http://
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
15,083
Reaction score
2,602
Trimline2 admin-pw-change merely looks up the IP address of your server using eth0 AFTER it resets the admin password. That lookup won't work until you change eth0 in the script. But changing the password should work just fine. Does ifconfig show that you have network connectivity?? Does iptables -nL show that you have access to the server from your IP address? Does disabling IPtables help: service iptables stop. If so, add the IP address of your workstation with /root/add-ip and then restart IPtables: iptables-restart.

Did you install from an SSH client? Not doing so would cause your desktop machine to not be whitelisted.
 

Trimline2

Guru
Joined
May 23, 2013
Messages
525
Reaction score
95
Location
Orlando, FL
Trimline2 admin-pw-change merely looks up the IP address of your server using eth0 AFTER it resets the admin password. That lookup won't work until you change eth0 in the script. But changing the password should work just fine. Does ifconfig show that you have network connectivity?? Does iptables -nL show that you have access to the server from your IP address? Does disabling IPtables help: service iptables stop. If so, add the IP address of your workstation with /root/add-ip and then restart IPtables: iptables-restart.
Does ifconfig show that you have network connectivity?? - Yes (I masked the IP)

Code:
lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:4135 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4135 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:361613 (353.1 KiB)  TX bytes:361613 (353.1 KiB)

venet0    Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:127.0.0.1  P-t-P:127.0.0.1  Bcast:0.0.0.0  Mask:255.255.255.255
          inet6 addr: 2602:ffa0:200:aa::e5c2/64 Scope:Global
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:755225 errors:0 dropped:0 overruns:0 frame:0
          TX packets:380957 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1084904364 (1.0 GiB)  TX bytes:35747075 (34.0 MiB)

venet0:0  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:99.99.30.218  P-t-P:99.99.30.218  Bcast:99.99.30.218  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

venet0:1  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:99.99.30.22  P-t-P:99.99.30.22  Bcast:99.99.30.22  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

venet0:2  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:99.99.30.219  P-t-P:99.99.30.219  Bcast:99.99.30.219  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

venet0:3  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:99.99.30.220  P-t-P:99.99.30.220  Bcast:99.99.30.220  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

venet0:4  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:99.99.30.221  P-t-P:99.99.30.221  Bcast:99.99.30.221  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1

venet0:5  Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:99.99.30.222  P-t-P:99.99.30.222  Bcast:99.99.30.222  Mask:255.255.255.255
          UP BROADCAST POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
 

Trimline2

Guru
Joined
May 23, 2013
Messages
525
Reaction score
95
Location
Orlando, FL
Does iptables -nL show that you have access to the server from your IP address? - Yes, it does display my IP address (nice job). Again, masked "me" out and my hostname .

Code:
 iptables -L
Chain INPUT (policy DROP)
target     prot opt source               destination
fail2ban-VSFTPD  tcp  --  anywhere             anywhere            tcp dpt:ftp
fail2ban-BadBots  tcp  --  anywhere             anywhere            multiport dports http,https
fail2ban-APACHE  tcp  --  anywhere             anywhere
fail2ban-ASTERISK  all  --  anywhere             anywhere
fail2ban-SSH  tcp  --  anywhere             anywhere            tcp dpt:ssh
ACCEPT     all  --  anywhere             anywhere
ACCEPT     tcp  --  anywhere             anywhere            tcp flags:ACK/ACK
ACCEPT     all  --  anywhere             anywhere            state ESTABLISHED
ACCEPT     all  --  anywhere             anywhere            state RELATED
ACCEPT     udp  --  anywhere             anywhere            udp spt:domain dpts:1024:65535
ACCEPT     icmp --  anywhere             anywhere            icmp echo-reply
Edited out some characters..............
ACCEPT     udp  --  8.3.252.23           anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT     udp  --  8.14.120.23          anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT     udp  --  8.17.37.23           anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT     udp  --  66.54.140.46         anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT     udp  --  66.54.140.47         anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT     udp  --  www.freenum.org      anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  cpe-24-211-64-206.sc.res.rr.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  gvgw1.simonics.com   anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  209.216.15.70.static.sna.hosting.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  bser1.bingotelecom.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  pbx30.rentpbx.com    anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  node04.dns-hosting.info  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     tcp  --  node04.dns-hosting.info  anywhere            tcp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  gw1.sip.us           anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  gw2.sip.us           anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  cr.anveo.com         anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  67.212.84.21         anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  static.206.39.9.176.clients.your-server.de  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  25.prd1.tms.anveo.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  50.22.102.242-static.reverse.softlayer.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  c-98-254-157-185.hsd1.fl.comcast.net  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  sip.didlogic.net     anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  c-98-254-157-185.hsd1.fl.comcast.net  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     udp  --  64.2.142.26          anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT     all  --  10.0.0.0/8           anywhere
ACCEPT     all  --  loopback/8           anywhere
ACCEPT     all  --  192.168.0.0/16       anywhere
ACCEPT     all  --  localhost.localdomain  anywhere
ACCEPT     all  --  rrcs-99-99-231-238.se.biz.rr.com  anywhere <======= ME
ACCEPT     all  --  MyInstanceName.com    anywhere

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

Chain fail2ban-APACHE (1 references)
target     prot opt source               destination
RETURN     all  --  anywhere             anywhere

Chain fail2ban-ASTERISK (1 references)
target     prot opt source               destination
RETURN     all  --  anywhere             anywhere

Chain fail2ban-BadBots (1 references)
target     prot opt source               destination
RETURN     all  --  anywhere             anywhere

Chain fail2ban-SSH (1 references)
target     prot opt source               destination
RETURN     all  --  anywhere             anywhere

Chain fail2ban-VSFTPD (1 references)
target     prot opt source               destination
RETURN     all  --  anywhere             anywhere
WARNING: Always run Incredible PBX VM behind a secure hardware-based firewall.
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
15,083
Reaction score
2,602
Try setting the default IP address in the Control Panel under the Network tab at the bottom.
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
15,083
Reaction score
2,602
Does iptables -nL show that you have access to the server from your IP address? - Yes, it does display my IP address (nice job). Again, masked "me" out and my hostname .

Code:
iptables -L
Chain INPUT (policy DROP)
target    prot opt source              destination
fail2ban-VSFTPD  tcp  --  anywhere            anywhere            tcp dpt:ftp
fail2ban-BadBots  tcp  --  anywhere            anywhere            multiport dports http,https
fail2ban-APACHE  tcp  --  anywhere            anywhere
fail2ban-ASTERISK  all  --  anywhere            anywhere
fail2ban-SSH  tcp  --  anywhere            anywhere            tcp dpt:ssh
ACCEPT    all  --  anywhere            anywhere
ACCEPT    tcp  --  anywhere            anywhere            tcp flags:ACK/ACK
ACCEPT    all  --  anywhere            anywhere            state ESTABLISHED
ACCEPT    all  --  anywhere            anywhere            state RELATED
ACCEPT    udp  --  anywhere            anywhere            udp spt:domain dpts:1024:65535
ACCEPT    icmp --  anywhere            anywhere            icmp echo-reply
Edited out some characters..............
ACCEPT    udp  --  8.3.252.23          anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT    udp  --  8.14.120.23          anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT    udp  --  8.17.37.23          anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT    udp  --  66.54.140.46        anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT    udp  --  66.54.140.47        anywhere            multiport dports sip,sip-tls,na-localise,5063,ca-1,ca-2,stanag-5066,authentx,5068,i-net-2000-npr,iax
ACCEPT    udp  --  www.freenum.org      anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  cpe-24-211-64-206.sc.res.rr.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  gvgw1.simonics.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  209.216.15.70.static.sna.hosting.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  bser1.bingotelecom.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  pbx30.rentpbx.com    anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  node04.dns-hosting.info  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    tcp  --  node04.dns-hosting.info  anywhere            tcp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  gw1.sip.us          anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  gw2.sip.us          anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  cr.anveo.com        anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  67.212.84.21        anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  static.206.39.9.176.clients.your-server.de  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  25.prd1.tms.anveo.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  50.22.102.242-static.reverse.softlayer.com  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  c-98-254-157-185.hsd1.fl.comcast.net  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  sip.didlogic.net    anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  c-98-254-157-185.hsd1.fl.comcast.net  anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    udp  --  64.2.142.26          anywhere            udp dpts:sip:i-net-2000-npr
ACCEPT    all  --  10.0.0.0/8          anywhere
ACCEPT    all  --  loopback/8          anywhere
ACCEPT    all  --  192.168.0.0/16      anywhere
ACCEPT    all  --  localhost.localdomain  anywhere
ACCEPT    all  --  rrcs-99-99-231-238.se.biz.rr.com  anywhere <======= ME
ACCEPT    all  --  MyInstanceName.com    anywhere
 
Chain FORWARD (policy ACCEPT)
target    prot opt source              destination
 
Chain OUTPUT (policy ACCEPT)
target    prot opt source              destination
 
Chain fail2ban-APACHE (1 references)
target    prot opt source              destination
RETURN    all  --  anywhere            anywhere
 
Chain fail2ban-ASTERISK (1 references)
target    prot opt source              destination
RETURN    all  --  anywhere            anywhere
 
Chain fail2ban-BadBots (1 references)
target    prot opt source              destination
RETURN    all  --  anywhere            anywhere
 
Chain fail2ban-SSH (1 references)
target    prot opt source              destination
RETURN    all  --  anywhere            anywhere
 
Chain fail2ban-VSFTPD (1 references)
target    prot opt source              destination
RETURN    all  --  anywhere            anywhere
WARNING: Always run Incredible PBX VM behind a secure hardware-based firewall.

Looks like /etc/sysconfig/iptables is a mess. Not sure why. It should be pure IP addresses, no FQDNs. Those all need to be fixed. What type machine are you logging in from?? What installer did you use to build the system? We haven't had FQDNs in the IPtables setup for years!
 

Trimline2

Guru
Joined
May 23, 2013
Messages
525
Reaction score
95
Location
Orlando, FL
Okay, the IP Address that was located in the ifconfig is now the default address via the control panel. I performed a reboot. Can't access via the web browser yet, but should I do a status, I see that the Public IP has not been assigned:

ward001.jpg
 

Trimline2

Guru
Joined
May 23, 2013
Messages
525
Reaction score
95
Location
Orlando, FL
Looks like /etc/sysconfig/iptables is a mess. Not sure why. It should be pure IP addresses, no FQDNs. Those all need to be fixed. What type machine are you logging in from?? What installer did you use to build the system? We haven't had FQDNs in the IPtables setup for years!
What type machine are you logging in from?? - Windows 8.1 using Putty

What installer did you use to build the system? What you specified above - wget http://incrediblepbx.com/incrediblepbx11.4.centos.tar.gz :

Code:
setenforce 0
yum -y upgrade
yum -y install net-tools nano wget
wget http://incrediblepbx.com/update-kernel-devel
chmod +x update-kernel-devel
./update-kernel-devel
reboot
 
cd /root
wget http://incrediblepbx.com/incrediblepbx11.4.centos.tar.gz
tar zxvf incrediblepbx*
./IncrediblePBX*
 

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
15,083
Reaction score
2,602
Okay, the IP Address that was located in the ifconfig is now the default address via the control panel. I performed a reboot. Can't access via the web browser yet, but should I do a status, I see that the Public IP has not been assigned:

View attachment 1735

See if you can ping pbxinaflash.com.
 

Members online

PIAF 5 - Powered by 3CX

Forum statistics

Threads
22,320
Messages
137,026
Members
14,550
Latest member
treimers