Resource icon

PIONEERS Incredible PBX 11.5 11.5

No permission to download

wardmundy

Nerd Uno
Joined
Oct 12, 2007
Messages
14,957
Reaction score
2,582

Prits

New Member
Joined
May 28, 2013
Messages
24
Reaction score
0
I followed these instructions http://nerdvittles.com/?p=7826 to install a fresh/clean 64-bit copy of 2.0.6.4.5, but in this article there is no mention on how to install the very latest of Incredible PBX 11.5... Please provide link to 11.5 (I found the link to incrediblepbx11 but not 11..5)

Thank you
 

Prits

New Member
Joined
May 28, 2013
Messages
24
Reaction score
0
Hello All,

Apologize in advance if the answer to my problem is posted elsewhere in this forum...

I just successfully installed a bare/clean PIAF 2.0.6.5.0 Green

PIAF Installed Version = 2.0.6.5 under *HARDWARE*
FreePBX Version = 2.11.0.11
Running Asterisk Version = 11.7.0
Asterisk Source Version = 11.7.0
Dahdi Source Version = 2.8.0.1
Libpri Source Version = 1.4.14

and then proceeded to install Incrediblepbx11...

After I run the script, I get the following message:

"This utility install Incredible PBX 11."
"Exiting. Asterisk 11 is required for this install."

and the script terminates back to the root prompt...

Ward, could you please advise/help? (I'm still an amateur so please bear with me)

I have no problem if I install a bare/clean PIAF 2.0.6.4.5

Thank you all!
 

Prits

New Member
Joined
May 28, 2013
Messages
24
Reaction score
0
TwigsUSAN!

Thank you for your quick response!

I will wait until Ward has updated the script.

Thank you!
 

Prits

New Member
Joined
May 28, 2013
Messages
24
Reaction score
0
Hello All,

Apologize in advance if the answer to my problem is posted elsewhere in this forum...

I just successfully installed a bare/clean PIAF 2.0.6.5.0 Green
AND
I just successfully installed a bare/clean of BYOB: Easy Peasy PIAF-Green with Asterisk 11.8.1 and ‘Genuine’ CentOS 6.5

Both installs go 100% smooth UNTIL after install, I download and install Incrediblepbx11, then I get a lot of errors and find that some 56 modules revert back to various previous versions! (including beta framework etc)

I ignored the error messages and did module admin and downloaded/updated all the modules again... BUT is this normal? Or has Incrediblepbx11 script not caught up yet with the latest?

Thank you again everyone!

HERE IS MY STATUS AFTER updating 56 MODULES that had reverted back using incrediblepbx11

PBX in a Flash GREEN Status Program
──────────────────────────────────────────────────────────────────────────────
┌────────────────────────SYSTEM INFORMATION───────────────────────────┐
│ Asterisk = ONLINE | Dahdi = ONLINE | MySQL = ONLINE │
│ SSH = ONLINE | Apache = ONLINE | Iptables = ONLINE │
│ Fail2ban = ONLINE | Internet = ONLINE | Ip6Tables = ONLINE │
│ Disk Free = ADEQUATE| Mem Free = ADEQUATE| NTPD = ONLINE │
│ SendMail = ONLINE | Samba = OFFLINE | Webmin = ONLINE │
│ Ethernet0 = ONLINE | Ethernet1 = N/A | Wlan0 = N/A │
│ │
│ PIAF Installed Version = 2.0.6.5 under *HARDWARE* │
│ FreePBX Version = 2.11.0.30 │
│ Running Asterisk Version = 11.8.1 │
│ Asterisk Source Version = 11.8.1 │
│ Dahdi Source Version = 2.9.0 │
│ Libpri Source Version = 1.4.14 │
│ IP Address = 192.168.0.195 on eth0 │
│ Operating System = CentOS release 6.5 (Final) │
│ Kernel Version = 2.6.32-431.1.2.0.1.el6.x86_64 - 64 Bit │
│ Incredible Version = 11.8
 

jlevans

New Member
Joined
Nov 19, 2017
Messages
1
Reaction score
0
Need Help! Sorry I searched but did not find any answers to my problem.

The Incredible PBX package was inadvertently installed on (over top of) our monitoring server (Centos 7), obviously it took over our system and database, is there a way to untangle this easily? No one here is a guru so any help is appreciated.

TIA Jeff
 

TirsoJRP

Member
Joined
Jan 8, 2015
Messages
85
Reaction score
30
is there a way to untangle this easily?
Simple short answer: No

Useless/won't fix it answer: You should have backups and make sure where you run an script such as IncrediblePBX.

To be honest the easiest option would be to make a new install of Centos7, migrate anything that survived and hope for the best... But this is IT, hope and luck should never be part of your workflow. If unsure about the migration from the botched server just start from scratch.
 

Members online

Latest Posts

PIAF 5 - Powered by 3CX

Forum statistics

Threads
22,273
Messages
136,528
Members
14,505
Latest member
athan