louisnguyen
New Member
- Joined
- Oct 28, 2016
- Messages
- 2
- Reaction score
- 0
Hello everyone,
I have problem receiving fax via iaxmodem with hylafax on asterisk 13. Below is the log I got:
I've been searching for 03 days and tried lots of thing but it still not working. Any help is appreciated.
Thanks alot,
Louis
I have problem receiving fax via iaxmodem with hylafax on asterisk 13. Below is the log I got:
Code:
Oct 31 05:06:04.47: [ 1846]: SESSION BEGIN 000000130 +41412404959
Oct 31 05:06:04.47: [ 1846]: HylaFAX (tm) Version 5.5.8
Oct 31 05:06:04.47: [ 1846]: CallID: '+3122811746' '3122811746' '<NONE>' 's'
Oct 31 05:06:04.47: [ 1846]: MODEM set XON/XOFF/FLUSH: input ignored, output disabled
Oct 31 05:06:04.47: [ 1846]: <-- [4:ATA\r]
Oct 31 05:06:08.21: [ 1846]: --> [7:CONNECT]
Oct 31 05:06:08.22: [ 1846]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyIAX0'
Oct 31 05:06:08.22: [ 1846]: RECV FAX: begin
Oct 31 05:06:08.22: [ 1846]: <-- data [32]
Oct 31 05:06:08.22: [ 1846]: <-- data [2]
Oct 31 05:06:09.19: [ 1846]: --> [7:CONNECT]
Oct 31 05:06:09.19: [ 1846]: <-- data [23]
Oct 31 05:06:09.19: [ 1846]: <-- data [2]
Oct 31 05:06:09.95: [ 1846]: --> [7:CONNECT]
Oct 31 05:06:09.95: [ 1846]: <-- data [13]
Oct 31 05:06:09.95: [ 1846]: <-- data [2]
Oct 31 05:06:10.54: [ 1846]: --> [2:OK]
Oct 31 05:06:10.54: [ 1846]: <-- [9:AT+FRH=3\r]
Oct 31 05:06:17.54: [ 1846]: --> [0:]
Oct 31 05:06:17.54: [ 1846]: MODEM <Empty line>
Oct 31 05:06:17.54: [ 1846]: MODEM TIMEOUT: waiting for v.21 carrier
Oct 31 05:06:17.54: [ 1846]: <-- data [1]
Oct 31 05:06:17.56: [ 1846]: --> [2:OK]
Oct 31 05:06:17.56: [ 1846]: <-- [9:AT+FRS=7\r]
Oct 31 05:06:56.60: [ 1846]: --> [10:NO CARRIER]
Oct 31 05:06:56.61: [ 1846]: MODEM No carrier
Oct 31 05:06:56.61: [ 1846]: Failure to receive silence (synchronization failure). {E100}
Oct 31 05:06:56.61: [ 1846]: RECV FAX: Failure to receive silence (synchronization failure). {E100}
Oct 31 05:06:56.61: [ 1846]: RECV FAX: end
Oct 31 05:06:56.61: [ 1846]: Failure to receive silence (synchronization failure). {E100}
Oct 31 05:06:56.61: [ 1846]: <-- [5:ATH0\r]
Oct 31 05:06:56.61: [ 1846]: --> [2:OK]
Oct 31 05:06:56.61: [ 1846]: MODEM set DTR OFF
Oct 31 05:06:56.61: [ 1846]: MODEM set baud rate: 0 baud (flow control unchanged)
Oct 31 05:06:56.61: [ 1846]: SESSION END
I've been searching for 03 days and tried lots of thing but it still not working. Any help is appreciated.
Thanks alot,
Louis
Last edited by a moderator: