NO JOY Help, trying to install TDM Card, but no channels show

Discussion in 'Help' started by gcmartin3, Nov 30, 2016.

  1. gcmartin3

    gcmartin3 Member

    Joined:
    Mar 20, 2008
    Messages:
    73
    Likes Received:
    0
    Hi, I've been trying to get this card installed for a few days now and have run out of ideas. Lots of searching on the internet and tried a number of things and made no progress.

    I have a new PIAF purple install.

    Any suggestions will be appreciated. And thanks very much in advance.

    Greg


    Here's what I have:

    cat dahdi-channels.conf

    ; Autogenerated by /usr/sbin/dahdi_genconf on Wed Nov 30 23:40:04 2016

    ; If you edit this file and execute /usr/sbin/dahdi_genconf again,

    ; your manual changes will be LOST.

    ; Dahdi Channels Configurations (chan_dahdi.conf)

    ;

    ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended

    ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings

    ;


    ; Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)

    ;;; line="1 WCTDM/4/0 FXSKS (EC: MG2 - INACTIVE)"

    signalling=fxs_ks

    callerid=asreceived

    group=0

    context=from-pstn

    channel => 1

    callerid=

    group=

    context=default


    ;;; line="2 WCTDM/4/1 FXSKS (EC: MG2 - INACTIVE)"

    signalling=fxs_ks

    callerid=asreceived

    group=0

    context=from-pstn

    channel => 2

    callerid=

    group=

    context=default


    ;;; line="3 WCTDM/4/2 FXSKS (EC: MG2 - INACTIVE)"

    signalling=fxs_ks

    callerid=asreceived

    group=0

    context=from-pstn

    channel => 3

    callerid=

    group=

    context=default


    ;;; line="4 WCTDM/4/3 FXSKS (EC: MG2 - INACTIVE)"

    signalling=fxs_ks

    callerid=asreceived

    group=0

    context=from-pstn

    channel => 4

    callerid=

    group=

    context=default



    root@phpbx:/etc/asterisk $ cat chan_dahdi.conf

    #include dahdi-channels.conf

    root@phpbx:/etc/asterisk $ asterisk -vvvvvvvr

    Asterisk 1.8.32.2, Copyright (C) 1999 - 2013 Digium, Inc. and others.

    Created by Mark Spencer <markster@digium.com>

    Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.

    This is free software, with components licensed under the GNU General Public

    License version 2 and other licenses; you are welcome to redistribute it under

    certain conditions. Type 'core show license' for details.

    =========================================================================

    Connected to Asterisk 1.8.32.2 currently running on phpbx (pid = 2108)

    Verbosity is at least 7

    phpbx*CLI> dahdi show status

    Description Alarms IRQ bpviol CRC Fra Codi Options LBO

    Wildcard TDM400P REV E/F Board 5 OK 0 0 0 CAS Unk 0 db (CSU)/0-133 feet (DSX-1)

    phpbx*CLI> dahdi show channels

    Chan Extension Context Language MOH Interpret Blocked State

    pseudo default default In Service

    phpbx*CLI> exit

    Executing last minute cleanups

    root@phpbx:/etc/asterisk $ dahdi_cfg -vv

    DAHDI Tools Version - 2.10.0.1


    DAHDI Version: 2.10.0.1

    Echo Canceller(s): MG2

    Configuration

    ======================



    Channel map:


    Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01)

    Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02)

    Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03)

    Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04)


    4 channels to configure.


    Setting echocan for channel 1 to mg2

    Setting echocan for channel 2 to mg2

    Setting echocan for channel 3 to mg2

    Setting echocan for channel 4 to mg2

    root@phpbx:/etc/asterisk $



    Here's a portion of my dmesg

    Adding 7811068k swap on /dev/mapper/vg_phpbx-lv_swap. Priority:-1 extents:1 across:7811068k

    NET: Registered protocol family 10

    lo: Disabled Privacy Extensions

    e1000e 0000:00:19.0: irq 25 for MSI/MSI-X

    e1000e 0000:00:19.0: irq 25 for MSI/MSI-X

    ADDRCONF(NETDEV_UP): eth0: link is not ready

    type=1305 audit(1480519320.877:3): audit_pid=1272 old=0 auid=4294967295 ses=4294967295 res=1

    dahdi: Version: 2.10.0.1

    dahdi: Telephony Interface Registered on major 196

    wctdm 0000:01:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21

    dahdi: Warning: Span WCTDM/4 didn't specify a spantype. Please fix driver!

    Freshmaker version: 71

    Freshmaker passed register test

    Module 0: Installed -- AUTO FXO (FCC mode)

    Module 1: Installed -- AUTO FXO (FCC mode)

    Module 2: Installed -- AUTO FXO (FCC mode)

    Module 3: Installed -- AUTO FXO (FCC mode)

    dahdi_transcode: Loaded.

    INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)

    INFO-xpp: FEATURE: with PROTOCOL_DEBUG

    INFO-xpp: FEATURE: with sync_tick() from DAHDI

    INFO-xpp_usb: revision Unknown

    usbcore: registered new interface driver xpp_usb

    dahdi_devices pci:0000:01:00.0: local span 1 is already assigned span 1

    dahdi_echocan_mg2: Registered echo canceler 'MG2'
     
  2. gcmartin3

    gcmartin3 Member

    Joined:
    Mar 20, 2008
    Messages:
    73
    Likes Received:
    0
    I don't know if it will do any good, but I am pulling at straws. Would anyone suggest re-installing dahdi? This is a new install and I have yum updated already.

    Thanks

    Best regards
    Greg
     
  3. gcmartin3

    gcmartin3 Member

    Joined:
    Mar 20, 2008
    Messages:
    73
    Likes Received:
    0
    Sadly, this is getting worse. I downloaded Dahdi Complete 2.11.1 and compiled it. When trying to run dahdi_cfg, I now get this error

    dahdi_cfg -vv

    dahdi_cfg: error while loading shared libraries: libtonezone.so.2: cannot open shared object file: No such file or directory

    After some google searching, I found a link to someone with similar problems and his solution was to compile dahdi_tools. So I downloaded dahdi_tools and compiled it and installed. Unfortunately, same error:

    dahdi_cfg: error while loading shared libraries: libtonezone.so.2: cannot open shared object file: No such file or directory

    Now, I'm considering totally reinstalling everything (centos minimal) and piaf purple. However, I don't expect anything to be different.

    Hopefully, someone has some idea?

    I'll try anything now.

    Thanks much

    Best regards
    Greg
     
  4. domiflichi

    domiflichi New Member

    Joined:
    Jan 18, 2012
    Messages:
    20
    Likes Received:
    1
    Did you ever get this resolved? I'm having a very similar problem.
     

Share This Page