So I did a fresh install of Raspian/IncrediblePBX for my RasPi3B+. I used the latest incrediblepbx13.13-raspbian8.img, dated June 2, 2018. I went through the initial setup with no problems. I then installed Webmin. I then did an apt-get update/upgrade. This is the same process I ran through a couple of weeks ago.
After that I created a trunk for a line I have with PhonePower and the corresponding extension/inbound/outbound. All tested and working properly.
My first go around a couple of weeks ago, I followed this guide: http://nerdvittles.com/?p=26267. This time around I followed this guide: http://nerdvittles.com/?p=26315.
I'm not including all the output, only the sections with errors... See image below for what the final result looks like:
It was actually 121 x 43 or 141 x 43 (both sizes cause this. I've received this error before and the build has bee just fine.)
... (There's more here, but can't catch it before the screen below opens. Once it opens, it stays like this, even after being left for a half hour. In the past, the entire build/install only too 10 mins.)
After that I created a trunk for a line I have with PhonePower and the corresponding extension/inbound/outbound. All tested and working properly.
My first go around a couple of weeks ago, I followed this guide: http://nerdvittles.com/?p=26267. This time around I followed this guide: http://nerdvittles.com/?p=26315.
I'm not including all the output, only the sections with errors... See image below for what the final result looks like:
Code:
This appears to be a fresh install of GVSIP for Incredible PBX.
Do you wish to install all of the required components? (y/n) y
Preparing for GVSIP initialization...
cp: cannot create regular file ‘/root/COPYING’: Operation not permitted
Please wait...
Creating symlink for fwconsole
ln: failed to create symbolic link ‘/usr/local/sbin/fwconsole’: File exists
!!!!amportal is depreciated. Please use fwconsole!!!!
forwarding all commands to 'fwconsole'
****** WARNING WARNING WARNING WARNING ******
Window size is too small: 80 x 24
Code:
Resize console window to at least 82 x 30.
Do it NOW before continuing with the install.
Otherwise, Asterisk may fail to build.
****** WARNING WARNING WARNING WARNING ******
Press Enter to proceed at your own risk...
Updating Asterisk with NAF gvsip patches for PJSIP...
rm: cannot remove ‘/usr/lib/asterisk/modules’: Is a directory
asterisk-13.22.0/
...
patching file main/sdp_srtp.c
--2018-07-17 16:03:02-- https://github.com/naf419/asterisk/compare/master...naf419:gvsip.patch
Resolving github.com (github.com)... 192.30.253.113, 192.30.253.112
Connecting to github.com (github.com)|192.30.253.113|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/plain]
Saving to: ‘master...naf419:gvsip.patch’
0K .......... .......... .......... .......... .......... 833K
50K .......... .......... .......... .......... .......... 1.87M
100K .......... .......... .......... .......... .......... 1.42M
150K .......... ........ 1.57M=0.1s
2018-07-17 16:03:02 (1.25 MB/s) - ‘master...naf419:gvsip.patch’ saved [172334]
patching file README.md
Hunk #1 FAILED at 1.
1 out of 1 hunk FAILED -- saving rejects to file README.md.rej
patching file include/asterisk/res_pjsip.h
Hunk #1 succeeded at 397 (offset -4 lines).
Hunk #2 succeeded at 417 (offset -4 lines).
patching file res/res_pjsip.c
Hunk #1 succeeded at 1072 (offset -23 lines).
patching file res/res_pjsip/config_auth.c
Hunk #4 succeeded at 314 (offset -61 lines).
patching file res/res_pjsip/config_system.c
Hunk #1 succeeded at 127 (offset 17 lines).
patching file res/res_pjsip_outbound_registration.c
Hunk #6 succeeded at 609 (offset 1 line).
Hunk #7 succeeded at 997 (offset 1 line).
Hunk #8 succeeded at 1352 (offset 1 line).
Hunk #9 succeeded at 1492 (offset 1 line).
Hunk #10 succeeded at 2298 (offset 1 line).
Hunk #11 succeeded at 2438 with fuzz 2 (offset 3 lines).
Hunk #12 succeeded at 2501 (offset 3 lines).
Hunk #13 FAILED at 2550.
1 out of 13 hunks FAILED -- saving rejects to file res/res_pjsip_outbound_registration.c.rej
patching file third-party/pjproject/patches/0100-oauth.patch
patching file README.md
Hunk #1 FAILED at 5.
Hunk #2 FAILED at 48.
2 out of 2 hunks FAILED -- saving rejects to file README.md.rej
patching file res/res_pjsip.c
Hunk #1 succeeded at 1092 (offset -23 lines).
patching file res/res_pjsip_outbound_registration.c
Hunk #1 succeeded at 2438 with fuzz 2 (offset 3 lines).
Hunk #2 succeeded at 2499 (offset 3 lines).
Hunk #3 FAILED at 2547.
1 out of 3 hunks FAILED -- saving rejects to file res/res_pjsip_outbound_registration.c.rej
patching file res/res_pjsip_outbound_registration.c
Hunk #3 succeeded at 1001 (offset 1 line).
Hunk #4 succeeded at 1014 (offset 1 line).
Hunk #5 succeeded at 1025 (offset 1 line).
Hunk #6 succeeded at 1417 (offset 1 line).
Hunk #7 succeeded at 1494 (offset 1 line).
Hunk #8 succeeded at 2295 (offset 1 line).
Hunk #9 succeeded at 2309 (offset 1 line).
Hunk #10 succeeded at 2342 (offset 1 line).
Hunk #11 succeeded at 2358 (offset 1 line).
Hunk #12 succeeded at 2421 (offset 1 line).
Hunk #13 succeeded at 2451 (offset 3 lines).
...
patching file res/res_pjsip.c
Hunk #1 succeeded at 1665 with fuzz 2 (offset 5 lines).
patching file res/res_pjsip/config_system.c
Hunk #1 FAILED at 52.
Hunk #2 succeeded at 127 (offset 17 lines).
Hunk #3 FAILED at 187.
2 out of 3 hunks FAILED -- saving rejects to file res/res_pjsip/config_system.c.rej
patching file res/res_pjsip_outbound_authenticator_digest.c
patching file res/res_pjsip_outbound_registration.c
Hunk #1 succeeded at 2355 (offset 1 line).
...
patching file res/res_pjsip.c
Hunk #1 succeeded at 1665 with fuzz 2 (offset 5 lines).
patching file res/res_pjsip/config_system.c
Hunk #1 FAILED at 52.
Hunk #2 succeeded at 127 (offset 15 lines).
Hunk #3 FAILED at 186.
2 out of 3 hunks FAILED -- saving rejects to file res/res_pjsip/config_system.c.rej
...
checking for -Wshadow... yes
checking for -march=native support... *** Error in `gcc': double free or corruption (top): 0x01510610 ***
no
checking whether to use rpath... not needed
checking for sysinfo... yes
...
checking pkg-config is at least version 0.9.0... yes
checking for GTK2... yes
configure: creating ./config.status
config.status: creating makeopts
config.status: creating autoconfig.h
configure: Menuselect build configuration successfully completed
.$$$$$$$$$$$$$$$=..
.$7$7.. .7$$7:.
.$$:. ,$7.7
.$7. 7$$$$ .$$77
..$$. $$$$$ .$$$7
..7$ .?. $$$$$ .?. 7$$$.
$.$. .$$$7. $$$$7 .7$$$. .$$$.
.777. .$$$$$$77$$$77$$$$$7. $$$,
$$$~ .7$$$$$$$$$$$$$7. .$$$.
.$$7 .7$$$$$$$7: ?$$$.
$$$ ?7$$$$$$$$$$I .$$$7
$$$ .7$$$$$$$$$$$$$$$$ :$$$.
$$$ $$$$$$7$$$$$$$$$$$$ .$$$.
$$$ $$$ 7$$$7 .$$$ .$$$.
$$$$ $$$$7 .$$$.
7$$$7 7$$$$ 7$$$
$$$$$ $$$
$$$$7. $$ (TM)
$$$$$$$. .7$$$$$$ $$
$$$$$$$$$$$$7$$$$$$$$$.$$$$$$
$$$$$$$$$$$$$$$$.
configure: Package configured for:
configure: OS type : linux-gnueabihf
configure: Host CPU : armv7l
configure: build-cpu:vendor:os: armv7l : unknown : linux-gnueabihf :
configure: host-cpu:vendor:os: armv7l : unknown : linux-gnueabihf :
CC="cc" CXX="g++" LD="" AR="" RANLIB="" CFLAGS="" LDFLAGS="" make -C menuselect CONFIGURE_SILENT="--silent" menuselect
make[1]: Entering directory '/usr/src/asterisk-13.22.0/menuselect'
gcc -g -D_GNU_SOURCE -Wall -I/usr/include/libxml2 -c -o menuselect.o menuselect.c
gcc -g -D_GNU_SOURCE -Wall -c -o strcompat.o strcompat.c
gcc -g -D_GNU_SOURCE -Wall -c -o menuselect_stub.o menuselect_stub.c
gcc -o menuselect menuselect.o strcompat.o menuselect_stub.o -lxml2
make[1]: Leaving directory '/usr/src/asterisk-13.22.0/menuselect'
Generating input for menuselect ...
GVSIP-NAF-GUI (beta)
Code:cd /root wget http://incrediblepbx.com/gvsip-naf-gui.tar.gz tar zxvf gvsip-naf-gui.tar.gz rm -f gvsip-naf-gui.tar.gz cd gvsip-naf ./install-gvsip