TUTORIAL Flowroute Trunk configuration for XiVO

rjm

Guru
Joined
Oct 21, 2007
Messages
475
Reaction score
21
upload_2016-9-24_17-12-20.png

Name: is your Flowroute user account number
Authentication username: Again, the Flowroute user account number
Password: Flowroute secret/password

Same here:

upload_2016-9-24_17-14-37.png

So for Signaling, I'm behind NAT so Monitoring is set to YES and the Codec will be G.711 u-law.

upload_2016-9-24_17-15-46.png


Advanced:

upload_2016-9-24_17-18-5.png

I haven't done the inbound or outbound yet, so that's next. I do get nice music playing so I have one way audio. Haven't tested two way yet obviously.
 

steven.ot

New Member
Joined
Nov 18, 2014
Messages
19
Reaction score
3
General Tab:
Name: flowroute-outbound [or whatever you want to label this; I don't think it needs to be account ID specifically.]
Connection Type: Friend [rather than peer]

Everything else looks perfect. I have gotten registration working with FlowRoute, just have to finish setting up lines/routes and test everything.

Update:
I can confirm the above works for outbound calling.
I do not have a DID through FlowRoute to test inbound calling.
 
Last edited:

jeff.h

Guru
Joined
Dec 1, 2010
Messages
482
Reaction score
70
Ok I just tested this and it works just fine for both outbound and inbound, however there is one small issue that I can't get around. Flowroute sends the DID in 11 digit format, meaning that you need to put a 1 in front of the number. That seems to be messing with the inbound caller ID and it shows up with two zeros in front of the 11 dight number. 19991234567 shows up as 0019991234567 and UNKNOWN.
 

Members online

PIAF 5 - Powered by 3CX

Forum statistics

Threads
22,371
Messages
137,417
Members
14,576
Latest member
emmonks