oldrummer
New Member
- Joined
- Feb 18, 2015
- Messages
- 2
- Reaction score
- 0
I have ALMOST successfully installed the "Doorbell fon DP28IT and the DP38 NBKS" and have it working with PIAF through an OBI110.
It seems to me that something (doorbell fon interface or OBI110) is not registering right away or not registering fast enough the first time - which makes the entire setup useless.
Setup Wiring
Doorstation ->doorfon interface, door 1 -> out doorfon interface on station "to phone" to OBI station "Phone" port -> OBI internet port to switch for PBX access
I used this as a basis for my initial setup, but did not do Step 6 (emergency) because it will only be used as a intercom
http://wiki.freepbx.org/pages/viewpage.action?pageId=4161594
Any ideas? I am stumped
- The first time I press the door station button it rings a call queue (like it is supposed to) but I do not get audio either way.
- If I wait until it times out and immediately press the door station button again it works with audio perfectly.
- If I wait a few minutes to press the door button, no audio re-appears.
It seems to me that something (doorbell fon interface or OBI110) is not registering right away or not registering fast enough the first time - which makes the entire setup useless.
Setup Wiring
Doorstation ->doorfon interface, door 1 -> out doorfon interface on station "to phone" to OBI station "Phone" port -> OBI internet port to switch for PBX access
I used this as a basis for my initial setup, but did not do Step 6 (emergency) because it will only be used as a intercom
http://wiki.freepbx.org/pages/viewpage.action?pageId=4161594
Any ideas? I am stumped