GO HERE Device and User mode - User display

[edlentz]

I have a customer that is using D&U for 45 devices and 60 users. Fpbx 13 and Asterisk 13. I have looked every placce I can think of and cannot come up with a way to show which users are signed in. There must be a way to do this, the system knows. Can someone point me in the right direction?

Thanks

 

[rchalk]

I remember some time ago that someone asked for a mod to FOP2, to accommodate the D/U mode, and a change was made. I don't know exactly what the change accomplished, but you might go to the developer's site, and ask him.

https://www.fop2.com/docs/installation.php

Regards

 

[edlentz]

Thanks I will do just that. They actually are using FOP2 but I want to be able to check from offsite without the port forwarding and all.

 

[rchalk]

If FOP2 allows you to see what you are looking for, you should be able to set it up so you can log in remotely, I would think. I did this on a RentPBX server, and configured the FOP2 settings for the different users to see what they needed to see...

Good luck,