TIPS Choose which trunk to dial out on

jlcar

New Member
Joined
Jul 17, 2013
Messages
2
Reaction score
0
Hi all,

I am using PBX in a Flash, freepbx 2.10.1.9, asterisk 1.8.23.0, 32bit (the latest download)

I have a setup question that I have not been able to resolve. I might not know the correct search terms to use because I don't think it should be too hard to do what I want to do.

I have 2 trunks both work outgoing and incoming. (flowroute, voipms)
I have 4 extensions
I want to be able to choose flowroute from any extension in the house by dialing 9, and then voipms when dialing out normally.
The 9 is not important, it can be anything that might make more sense.
I think I need 3 outbound routes, 1 for the 9 that will send it to flowroute the second outbound route and then third outbound route for voipms.

I'm pretty sure I am just confused with dialed number manipulation rules in the trunks and dial patterns in the outbound routes.

Thanks,

Jeff
 

atsak

Guru
Joined
Sep 7, 2009
Messages
1,772
Reaction score
169
Then you just need two outbound routes. First one you put a prefix of 9 (so the outbound 9 is stripped before passing it to flowroute), then 1NXXNXXXXXX in the dial pattern, and make sure this is at the top of the outbound route list on the right in freepbx. Second one you put 1NXXNXXXXXX in the field (and 011. if you want international calls to work). If you want 10 digit dialing to work add 1 in the prepend field on a second line. If you're going to support 911 put that at the very top of the outbound route list at the top.
 

Members online

PIAF 5 - Powered by 3CX

Forum statistics

Threads
22,266
Messages
136,464
Members
14,500
Latest member
yeoldroundabout