I'm setting up a new machine on Centos 7 with 16-15.2
Flowroute has informed me that chan_sip is no longer supported (I was trying to register on x.x.x.133 and getting reponses from x.x.x.134 (for example) due to mistranslation in the xxx.sip.flowroute.com name used to register. I'm not sure I believe them since I can plug in the old machine and it will connect in a jiffy with chan_sip, but whatever. PJSIP, here we come.
So, I followed (tried to follow) their guide, and no dice.
I'm getting the following error:
[2019-09-27 18:58:57] WARNING[2347]: res_pjsip_outbound_registration.c:792 schedule_retry: Temporal response '401' received from 'sip:us-east-nj.sip.flowroute.com:5060' on registration attempt to 'sip:[email protected]:5060', retrying in '60'
Steps I've taken:
In Setting > Asterisk SIP Settings, chan_pjsip, have PJSIP on port 5060 (per flowroute);
General SIP Settings, my external address is my DDNS, local networks are my 192.168 and my VPN of 10.0.
In the Trunk, I created a new PJSIP trunk and followed their guide: https://support.flowroute.com/customer/en/portal/articles/2960886-freepbx-pjsip-trunk-setup
I have my prefix (username) and password, the sip server us-east-nj.sip.flowroute.com, port is 5060.Match permit is all of their addresses as they request. Support path is yes and I set the codecs.
Not sure what else there could be to do. I'm only using flowroute for my trunks; the system has the default trunks which I think are all chan_SIP; I haven't tried to track them all down to disable, but it shouldn't matter.
Help?
Andrew
Flowroute has informed me that chan_sip is no longer supported (I was trying to register on x.x.x.133 and getting reponses from x.x.x.134 (for example) due to mistranslation in the xxx.sip.flowroute.com name used to register. I'm not sure I believe them since I can plug in the old machine and it will connect in a jiffy with chan_sip, but whatever. PJSIP, here we come.
So, I followed (tried to follow) their guide, and no dice.
I'm getting the following error:
[2019-09-27 18:58:57] WARNING[2347]: res_pjsip_outbound_registration.c:792 schedule_retry: Temporal response '401' received from 'sip:us-east-nj.sip.flowroute.com:5060' on registration attempt to 'sip:[email protected]:5060', retrying in '60'
Steps I've taken:
In Setting > Asterisk SIP Settings, chan_pjsip, have PJSIP on port 5060 (per flowroute);
General SIP Settings, my external address is my DDNS, local networks are my 192.168 and my VPN of 10.0.
In the Trunk, I created a new PJSIP trunk and followed their guide: https://support.flowroute.com/customer/en/portal/articles/2960886-freepbx-pjsip-trunk-setup
I have my prefix (username) and password, the sip server us-east-nj.sip.flowroute.com, port is 5060.Match permit is all of their addresses as they request. Support path is yes and I set the codecs.
Not sure what else there could be to do. I'm only using flowroute for my trunks; the system has the default trunks which I think are all chan_SIP; I haven't tried to track them all down to disable, but it shouldn't matter.
Help?
Andrew