This is a case of NO way audio - he can't hear or be heard.
I have a PIAF Green machine with SIP only (PJSIP didn't exist) and one remote user with a Yealink phone.
I'm trying to set up a 16-15 to get some upgraded features.
PBX Green sits at 192.168.40.29
PBX 16-15 sits at 192.168.40.60
I turn one machine OFF and the other on for testing
My (OpenwRT) router sits behind a FIOS router. The FIOS router is forwarding 5060-5069, 5160, 10000-20000, the AIX port and my knock ports to the OpenWRT router. The OpenWRT router has port forwarding commands set for both machines. If I want to try to get the 16-15 machine working, i disable the port forwards to .29 and enable the same forwards to .60. I then turn the router off and on in case it gets confused.
I have his home IP whitelisted in TM3 for both systems.
I have him reboot his phone to test when I switch machines. He shows as registered on each (not at the same time) and can place or receive calls - just NO audio in either direction.
On the Green machine, he has two way audio - no problems of any kind.
On the 16-15 machine, he has NO audio (either way) regardless of whether i configure his extension as chan_sip with NAT or pjsip (which is supposed to handle that).
What might I look for to diagnose this? What might I be missing in my 16-15 config since he's otherwise working perfectly in Green?
Thanks
Andrew
I have a PIAF Green machine with SIP only (PJSIP didn't exist) and one remote user with a Yealink phone.
I'm trying to set up a 16-15 to get some upgraded features.
PBX Green sits at 192.168.40.29
PBX 16-15 sits at 192.168.40.60
I turn one machine OFF and the other on for testing
My (OpenwRT) router sits behind a FIOS router. The FIOS router is forwarding 5060-5069, 5160, 10000-20000, the AIX port and my knock ports to the OpenWRT router. The OpenWRT router has port forwarding commands set for both machines. If I want to try to get the 16-15 machine working, i disable the port forwards to .29 and enable the same forwards to .60. I then turn the router off and on in case it gets confused.
I have his home IP whitelisted in TM3 for both systems.
I have him reboot his phone to test when I switch machines. He shows as registered on each (not at the same time) and can place or receive calls - just NO audio in either direction.
On the Green machine, he has two way audio - no problems of any kind.
On the 16-15 machine, he has NO audio (either way) regardless of whether i configure his extension as chan_sip with NAT or pjsip (which is supposed to handle that).
What might I look for to diagnose this? What might I be missing in my 16-15 config since he's otherwise working perfectly in Green?
Thanks
Andrew