NO JOY Cannot make incoming calls from non-SIP devices

pbxuser

New Member
Joined
Mar 6, 2016
Messages
5
Reaction score
0
Hello,


I am able to make out-going calls to the real world(non-sip phones) and am able to call extensions with software SIP programs but I am not able to make incoming calls.

I would say that devices that aren't registered to my PBX will not be able to have incoming calls

For example, if I use my cellphone and call my PBX assigned phone number it will instantly hangup. My software SIP does not receive the calls.

If I dail extension only on a pc with software SIP my other computer with software SIP will receive the call

I am using AWS image to note

I essentially followed this guide:
http://wiki.voip.ms/article/FreePBX_/_PBX_in_a_Flash

I left Outbound CallerID blank


Here is my trunk info
I left Outbound CallerID blank
canreinvite=nonat
nat=yes
context=from-trunk
host=*******
username=*****
fromuser=*****
secret=*****
type=peer
allow=ulaw
disallow=all
trustrpid=yes
sendrpid=yes
insecure=invite
qualify=no

******@*********@location.voip.ms
 

stanjohn

Member
Joined
Apr 18, 2011
Messages
116
Reaction score
16
Location
Alabama, USA
Nat problem, no audio on sip is a problem with the setup of your network routers and modems. One common problem is more than one router between pbx and internet. Decribe your local network, or try IAX connection to sip provider.
 

Uncle Robin

New Member
Joined
Mar 23, 2016
Messages
13
Reaction score
4
Forgive me if this is obvious, but have you configured an inbound route on the PBX (Connectivity -> Inbound Routes)?

Also I 2nd stanjohn about trying IAX; a nice feature/option VoIP.ms has.
 

pbxuser

New Member
Joined
Mar 6, 2016
Messages
5
Reaction score
0
Forgive me if this is obvious, but have you configured an inbound route on the PBX (Connectivity -> Inbound Routes)?

Also I 2nd stanjohn about trying IAX; a nice feature/option VoIP.ms has.
Yes,

I have
Route: Incoming
DID Number: Given DID from voip.ms

Set Destination:ringbackgroup and tried to extensions
left default options


When I call my PBX from my cellphone or a non-SIP phone it does not dial and just hangs up(terminates call). I believe it isn't an audio(codec) issue but it is not allowed to make a connection to my PBX.

I can use my software SIP to call the outside world and other extensions

I am currently using the AWS PBX in a Flash with a elastic IP address from Amazon. I have what is recommended firewall configuration in the following guide:
http://nerdvittles.com/?p=5060

I can try the IAX connection and see if it makes a difference

What log files can I look at to see what my calls are rejected?
 
Last edited:

Members online

PIAF 5 - Powered by 3CX

Forum statistics

Threads
22,456
Messages
138,072
Members
14,620
Latest member
Brads#Bell