I hate to open this discussion backup and I know I'm a new PIAF user so feel free to point me to someplace where this is already addressed. I have been reading this forum and others trying to get Callcentric's trunks to work inbound & outbound on my system. At this point I have tried all the configurations suggested and still nothing worked. I was especially excieted with Ward's "working solution", but I seem to have messed that up too! I'm afraid I've just created conflicting "repairs" and that may be what is preventing Callcentric+PIAF from working properly. I currently have Google Voice, VOIPo, Anveo.com (not Anveo Direct), and IPKall all working on my system so it seems my Callcentric configuration (or lack thereof) is the issue.
I'm going to recompile a clean Raspberry Pi2 system to just do Callcentric configuration tests. Could someone who has this working point me in the correct direction? I don't mind reworking some code, but with so many posts and issues I can't figure out which is the method to try. My system is the latest Incredible PBX 11-12.2 for RPi2/Asterisk 11.20.0/Incredible GUI 12.0.39 on a RPi2 running the latest version of Rasbarian Wheezy. All the Callcentric documents and threads I could find are below. Thanks!
Callcentric's own help (not very useful): www.callcentric.com/support/device/trixbox
PIAF Forum posts:
1. http://pbxinaflash.com/community/index.php?threads/using-callcentric-with-piaf.14121/
2. http://pbxinaflash.com/community/index.php?threads/callcentric-incoming-did-routing-solved.5265/
3. http://pbxinaflash.com/community/in...t-get-callcentric-calls-to-be-accepted.13537/
4. http://pbxinaflash.com/community/in...ittent-issues-cannot-receive-calls-100.13656/
5. http://pbxinaflash.com/community/index.php?threads/yet-another-callcentric-incoming-thread.16082/
I'm going to recompile a clean Raspberry Pi2 system to just do Callcentric configuration tests. Could someone who has this working point me in the correct direction? I don't mind reworking some code, but with so many posts and issues I can't figure out which is the method to try. My system is the latest Incredible PBX 11-12.2 for RPi2/Asterisk 11.20.0/Incredible GUI 12.0.39 on a RPi2 running the latest version of Rasbarian Wheezy. All the Callcentric documents and threads I could find are below. Thanks!
Callcentric's own help (not very useful): www.callcentric.com/support/device/trixbox
PIAF Forum posts:
1. http://pbxinaflash.com/community/index.php?threads/using-callcentric-with-piaf.14121/
2. http://pbxinaflash.com/community/index.php?threads/callcentric-incoming-did-routing-solved.5265/
3. http://pbxinaflash.com/community/in...t-get-callcentric-calls-to-be-accepted.13537/
4. http://pbxinaflash.com/community/in...ittent-issues-cannot-receive-calls-100.13656/
5. http://pbxinaflash.com/community/index.php?threads/yet-another-callcentric-incoming-thread.16082/