TIPS Anveo - Odd Behavior

[legallink]

So, working with Anveo still. All of the sudden, we only get 1 way audio on outbound calls only. And the one way is I can hear them, they can't hear me. When they call, no problems. This worked previously, just not now. I assume(d) it is a firewall issue, but not sure how to trouble shoot it.

I've been wondering about Anveo giving instructions for setting it up on port 5010 instead of port 5060 (the instructions given in the PIAF post list port 5060.)

I didn't see any errors in the logfiles, which makes no sense to me.

Thoughts?

On a related but potentially unrelated note, for Travelin Man 3, I can't add the below IP to the IPtables config:
/root/add-ip anveo2 67.212.84.21 Comes back with
** server can't find 21.84.212.67.in-addr.arpa.: NXDOMAIN

 

[briankelly63]

To little information....

Asterisk version?
Type of router?
Static IP?
Other trunks that work?
Trunk Config?
Your skill level?

 

[legallink]

Sorry about the delayed response, work has been crazy.

Asterisk is 1.8.11
Router? I'm on RentPBX
Static IP
Other trunks that work: Vitelity (no problems there)
Trunk Config: I followed the PBX in a flash tutorial
Skill level: beginner to moderate
I have the Travelin Man 3 installed, but I opened the ports to it.

 

[desmondfuller]

On a related but potentially unrelated note, for Travelin Man 3, I can't add the below IP to the IPtables config:

/root/add-ip anveo2 67.212.84.21 Comes back with
** server can't find 21.84.212.67.in-addr.arpa.: NXDOMAIN

Saw the same thing with this IP error. Went to Anveo's site and the is the correct IP.

 

[legallink]

Anybody have thoughts on this? Also, desmond, if that is the right IP address...how did you correct it?

 

[w1ve]

PM'd you. I'm on RentPBX and my Anveo stuff works fine. I sent you my settings.

 

[Tehnation]

Can you share your anveo settings with me as well! =)

 

[Tony Bui]

I can make calls out w/ Anveo, but my incoming calls from Anveo.com keep ringing and then hang up even after I answer the call on the extension (100). A look at the log shows that the call is answered. The log is shown below:
Anybody experience this?

== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
-- Called SIP/100
-- SIP/100-00000028 is ringing
-- SIP/100-00000028 answered SIP/Anveo-out-00000027
> 0xb6617210 -- Probation passed - setting RTP source address to 192.168.xx.xx:11706
[2014-02-05 18:38:57] WARNING[2106]: chan_sip.c:4174 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 102 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions
Packet timed out after 32000ms with no response
[2014-02-05 18:38:57] WARNING[2106]: chan_sip.c:4203 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions).