SOLVED Admin interface is blank page

jeff.h

Guru
Joined
Dec 1, 2010
Messages
482
Reaction score
70
After getting the notice that there were 2 new modules to install, digium_phones and dogiumaddoninstaller, I ran them, now the FreePBX admin page is just blank. The only thing that shows is the gray PIAF menu bar and nothing else. The phones still work, but I have no GUI now. I have done an amportal restart and rebooted, but no luck.
 

phoneguy

Guru
Joined
Jan 13, 2008
Messages
285
Reaction score
54
Well since you are getting a error on your FreePBX GUI maybe go look over at the FreePBX Forum and you would find your problem already reported and a temp solution tell Digium fixes the module hopefully tomorrow.

Basically it comes down to your version of PHP is missing a function Digium assumed was always installed and did not check to make sure first. freepbx.org/forum/installation/browser-error
 

jeff.h

Guru
Joined
Dec 1, 2010
Messages
482
Reaction score
70
Thanks for taking the time to help such a lowly noob as myself, it is good information.
 

tm1000

Schmoozecom INC/FreePBX
Joined
Dec 1, 2009
Messages
1,360
Reaction score
77
Hello!
Sorry for the troubles you were having. This simple command should get your system back up and running in perfect order. Thanks for your support and patience! Next time be sure to check Freepbx.org first when you run into these errors or problems!

Code:
amportal a ma upgrade digiumaddoninstaller
 
  • Like
Reactions: wardmundy

Members online

No members online now.

PIAF 5 - Powered by 3CX

Forum statistics

Threads
22,320
Messages
137,026
Members
14,550
Latest member
treimers