shade_emry
New Member
- Joined
- Dec 29, 2011
- Messages
- 5
- Reaction score
- 0
acn
If you can ssh into the phone,port 22 using the wan port, username root,
password acnum3c,
All you have to do is rip out all of acn's footprints in the root system in the config files out using the built in VIM editor on the phone. Since this phone uses drop bear, or Linux. Then just point them to the asterisk server.. the 1.8.x asterisk server will auto provision the phones both for outgoing and incoming, however MAKE SURE the video codec on the web admin page in the configuration settings are set, otherwise the phone will lock up.
the files you need to modify are in the /tmp folder in root
/tmp/tmp_config.conf
Unlike most ip phones, this phone requires a server to generate an encrypted provisioning file and then that file to be sent to it, hence all the ports that are open but not accessible. this allows the phone to call out, and turn on the register light. The asterisk pbx in a flash package is the best FREE piece of software i have found in my research that works with this phone. combine it with the google voice add-on, "and NO YOU DON'T NEED A GIZMO5 ACCOUNT" you then have an ata adapter and a phone in one that can call out and in from sip to sip, sip to pstn or pstn to sip (pstn=pacific stranded telephone network, aka regular phone line)
if you cannot ssh into it, update the phone by doing this:
+Turn off the phone for 30 seconds
++plug in a network cable that's connected to a modem or some form of internet
+++hold down the # 0 1 Keys, and turn the phone back on
++++WAIT FOR THE RED LOADING BAR AT THE TOP
+++++Release the keys and walk away from the device
++++++DO NOT INTERRUPT THE DOWNLOAD, the phone will reboot itself after it downloads the update from acn and installs it
I have my asterisk server running on a virtual box using a network bridge setup in VMware, stock settings, and i enabled all the video and audio codec's. this stopped all the lockups i was encountering.
I will post instructions on how to enable this phone and unlock it..I WILL NOT PROVIDE tech support, obvious answers.
IF you do not know how to use linux or a VIM editor, then please familiarize yourself before asking me directly,Google is your friend, trust me.
thats all i ask.
If you can ssh into the phone,port 22 using the wan port, username root,
password acnum3c,
All you have to do is rip out all of acn's footprints in the root system in the config files out using the built in VIM editor on the phone. Since this phone uses drop bear, or Linux. Then just point them to the asterisk server.. the 1.8.x asterisk server will auto provision the phones both for outgoing and incoming, however MAKE SURE the video codec on the web admin page in the configuration settings are set, otherwise the phone will lock up.
the files you need to modify are in the /tmp folder in root
/tmp/tmp_config.conf
Unlike most ip phones, this phone requires a server to generate an encrypted provisioning file and then that file to be sent to it, hence all the ports that are open but not accessible. this allows the phone to call out, and turn on the register light. The asterisk pbx in a flash package is the best FREE piece of software i have found in my research that works with this phone. combine it with the google voice add-on, "and NO YOU DON'T NEED A GIZMO5 ACCOUNT" you then have an ata adapter and a phone in one that can call out and in from sip to sip, sip to pstn or pstn to sip (pstn=pacific stranded telephone network, aka regular phone line)
if you cannot ssh into it, update the phone by doing this:
+Turn off the phone for 30 seconds
++plug in a network cable that's connected to a modem or some form of internet
+++hold down the # 0 1 Keys, and turn the phone back on
++++WAIT FOR THE RED LOADING BAR AT THE TOP
+++++Release the keys and walk away from the device
++++++DO NOT INTERRUPT THE DOWNLOAD, the phone will reboot itself after it downloads the update from acn and installs it
I have my asterisk server running on a virtual box using a network bridge setup in VMware, stock settings, and i enabled all the video and audio codec's. this stopped all the lockups i was encountering.
I will post instructions on how to enable this phone and unlock it..I WILL NOT PROVIDE tech support, obvious answers.
IF you do not know how to use linux or a VIM editor, then please familiarize yourself before asking me directly,Google is your friend, trust me.
thats all i ask.