Search results

Hey Ward Is there an update to this list? Thanks

Thanks Ward! weather by zip has both flite and swift lines with one commented out. Flipped the the lines and away it goes. Thanks again

OK brain fart Had to rebuild PIAF on my oldest machine. rebuild using centos 55 using astersik 1.4. Loaded weather by zip to test cepstral loaded cepstral-- good loaded swift --good How do I set the default tts to use swift instead of flite? tested swift ext 1234-- good, but weather (947)...

1+NXXNXXXXXX or 1NXXNXXXXXX?

Any change to this for freepbx 2.6?

inetnum: 113.96.0.0 - 113.111.255.255 netname: CHINANET-GD descr: CHINANET Guangdong province network descr: Data Communication Division descr: China Telecom country: CN inetnum: 119.144.0.0 - 119.147.255.255 netname: CHINANET-GD descr...

yes I believe it is proprietary protocol and that is going to be your problem. They do it to make money off of you ( and avaya/nortel/cisco/microsoft). endpoints are going to be your best bet I think. Going through the FXO on the intertel, you are putting a lot of extra steps in the dial...

When I have added a number to the blacklist and if that number calls again, the DIST will show "S". What's the complete number on the source? phone number, try looking up on google or whocalled.us

Did you have mondo installed? did you do a mondo backup before the trouble?

You are almost there. Start with your piaf and FXO port and yes just plug it into a phone jack. What you have to remember is that the house phones are still in front of the piaf system. you would be sharing the dialtone between the house and the piaf. once you have tested and played, then you...

need more info. the Inter-Tel CS-5200 will do up to 25 IP endpoints. The 5400 will go up to Ithink about 110. Sounds like you have multiple offices tied together ( from your exts numbers posted above). Do you have your books and manuals for the Inter-Tel CS-5200? You might try FXS card in the...

You may want to look at this from a computer/IT standpoint and not so much a phone installer one. IT might have hardware supoort and software support. May not be the same company. Hardware may be just replacing cards. Software support may be phone support, remote support by remoting in or maybe...

did you try a reboot to see if it cleared? How about *72 1001>1001?

You may want to link your hardware clock to ntp.

If you have used a cabling company to wire, they may have testers like Fluke that cat do a test for you.

Have you done update-scripts, update-fixes? You might to do that and then see what you get.

I have to agree with James on this one. There are alot of issues when it comes to rebroadcasting signals. (FEES!!!) Besides, point out to your client: how would they feel if one of the clients had called them and was put on hold and how someone on the radio was talking about another "gizmo"...

You are building a telephone system so keep the cost that you paid for the panasonic in mind. If you want to learn and play, you could go with the ebay item but you have to keep in mind, it is used. Plus I doubt it will go for anywhere near 5. That looks like a hook price to reel you in. Do a...

glad to help

no problem, you are welcome. best thing to tell you is read,read and read some more. Then test and test and test.............