Search results

  1. jmullinix

    TIPS Help finding VOIP company to port to

    I have had success porting from small areas with Sip.US. Nelson-Ball Ground phone company was bought by TDS Telecom several years ago. They are the LEC there. I also think you could port those numbers through Flowroute.
  2. jmullinix

    ALERT /usr/sbin/asterisk not found

    If the hard drive passee an fsck and memory passes a couple of memtest passes, I would assume that the box has been compromised. I would do nothing less than repartition, format and reinstall from scratch.
  3. jmullinix

    TIPS sip App registration

    You should be able to port forward UDP 5060 and UDP 10000-20000 to your phone server and access it with a remote phone. There are serious security issues when you do this. If you do this, make sure you have strong passwords on all of your SIP extensions and trunks. The SIP hacking bots can...
  4. jmullinix

    TIPS Assistance with updating Snom 710s

    Try it in firmware.xml and reboot a phone or two and see if they upgrade. If not, you will probably need create the mac_firmware.xml and put it in there. I have used this method to upgrade Snom phones in the past but I don't remember what I did to make it work. I would download the...
  5. jmullinix

    QUESTION Outbound External Call Delay

    When SIP carriers route calls using LCR (least cost routing) sometimes the carrier they use won't complete the call. It takes 10 seconds or so for the next carrier to pick it up and try. This happens often when the phone being called is in a rural area because the small telco's charge higher...
  6. jmullinix

    SUGGESTIONS Delayed Audio on internal and external calls

    I ran into a rather unique problem recently. Calls on a customer's server were randomly delaying audio for 10 seconds. This did not happen all of the time. It happened on inbound, outbound, internal and external calls and it was random. The worst part of the mystery is that it just started...
  7. jmullinix

    QUESTION Outgoing Phone Only

    Or, Create a context in extensions_custom.conf called from-internal-custom And put this line in it. Replace AAAA with the extension number exten => AAAA,1,hangup() Now any phone that is in the from-internal context will not be able to dial extension AAAA. The only downstroke to...
  8. jmullinix

    TRY THIS Trunks dropping off intermittently and re-registering

    I had a problem with stop and re-register last week with 8 X 8. I was using PFSense and had static outbound ports set. I had to disable the static outbound NAT to resolve the issue. YMMV
  9. jmullinix

    I HAVE A DREAM What will handle a Sangoma A400?

    The Sangoma A200 with a remora will fit swimmingly in a Jetway JC114 box. This is a small, wall-mountable box.
  10. jmullinix

    Grandstream GXP2000 Registration Failed

    Open the Asterisk CLI on your RentPBX, issue the command: sip set debug ip <outside IP of phone> then reboot the phone and paste the log here.
  11. jmullinix

    Set destination options

    I don't understand why you are doing this, but it looks to me that you will need to write some custom dialplan to accomplish this.
  12. jmullinix

    Cannot issue amportal restart

    It is interesting. The hardware for phone systems is sooooo cheap, that you may be better off putting in a warm spare rather than a RAID array.
  13. jmullinix

    Cannot issue amportal restart

    And just for what it is worth, I had a 5 drive hardware raid 5 drop two drives. I missed the warning on the first one. Believe it or not, the machine kept running, but I sufferred a lot of data loss and I recovered a lot of data from the array. I have only used software raid at Raid 1 and I...
  14. jmullinix

    Digium TDM400P REV H - Showing as E/F

    From the linux command line issue: cat /proc/interrupts That will show you your interrupts and their assignments. If you have a shared interrupt, it will show up.
  15. jmullinix

    SOLVED I hate networking! Help needed with RentPBX...

    Mark, I hope this is a typo. In this scenario, your Static IP address is set to your default gateway. I suspect that your network from ATT is 108.224.z.96/29 or 108.224.z.96 255.255.255.248. Your network address (unusable) is 108.224.z.96. Your first usable address is 108.224.z.97 and your...
  16. jmullinix

    Trunk Dial Rules

    Mike S. Check the link in my signature to the npanxx.php page on my website. If you enter an area code and exchange, tick the FreePBX 2.9 and higher radio button and add the Atlanta area area codes (770,404,678,470) to the comma separated list of area codes that are all local calls, this...
  17. jmullinix

    Choppy Sound and Poor Voice Quality

    You have 10% packet loss on either line 7 or 8, I can't tell which.
  18. jmullinix

    Choppy Sound and Poor Voice Quality

    One of the first things that I do when I encounter choppy audio over WAN is run Matt's Traceroute. This program repeatedly ping's each host and router on a path and give's you some idea of packet loss at each hop. To run Matt's Traceroute, enter: mtr <ip of remote host> I have a customer...
  19. jmullinix

    FYI FollowMe to Cell with CallerID

    What kind of trunk are you using, VOIP or PRI?
  20. jmullinix

    FYI FollowMe to Cell with CallerID

    If you are using a PRI or any connection with an LEC or CLEC, your caller ID on outbound can only be one of your DID's. Make sure when you do the follow me, your CallerID being sent to the cell phone is not the caller ID of the inbound caller. If it is, the call will pass away and there is...
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top