Search results

  1. dallas

    SOLVED question regarding how to setup remote extension

    Double check the ports in use for sip at both ends of the connection. Wrong password might also be an indication of a port mismatch.
  2. dallas

    SOLVED iptables question for "remote" phones

    If you are running IncrediblePBX you shouldn’t be changing iptables because it is managed by IPBX.
  3. dallas

    SOLVED question regarding how to setup remote extension

    How about posting the sanitized log output for a registration attempt.
  4. dallas

    QUIRK FYI... Sip calls through voip.ms fail (solution)

    Well I wish you luck but I'm out.
  5. dallas

    QUIRK FYI... Sip calls through voip.ms fail (solution)

    I really want to help you with this but if you don't/won't post the log output it's almost impossible to help as it could be a myriad of things causing the timeout. Reading and analyzing logs is necessary to diagnose this problem. If it was my problem I would be getting a pjsip trunk working on...
  6. dallas

    QUIRK FYI... Sip calls through voip.ms fail (solution)

    I find it hard to believe that the logs are empty. Do you have logging turned on with all options selected?
  7. dallas

    QUIRK FYI... Sip calls through voip.ms fail (solution)

    Here are some Voip.ms article I found about using PJSIP. https://wiki.voip.ms/article/FreePBX_(PJSIP) https://wiki.voip.ms/article/Asterisk_PJSIP https://community.freepbx.org/t/freepbx-w-voip-ms-using-tls/80603
  8. dallas

    QUIRK FYI... Sip calls through voip.ms fail (solution)

    What about Setting > Asterisk SIP Settings >SIP Settings [chan_pjsip] > TLS/SSL/SRTP Settings > SSL Method? And also the Transport section. Is everything correct there?
  9. dallas

    QUIRK FYI... Sip calls through voip.ms fail (solution)

    Well you are certainly at square one then. Start by making sure you are using the correct port for TLS at your end and at the voip.ms end. Then look at your From Domain and Match (Permit) settings and Contact User, From User and Authentication.
  10. dallas

    QUIRK FYI... Sip calls through voip.ms fail (solution)

    How do you know that if there’s nothing in the logs? Please post the log of a registration attempt.
  11. dallas

    QUIRK FYI... Sip calls through voip.ms fail (solution)

    Are you saying that you don’t even see the registration attempt?
  12. dallas

    QUIRK FYI... Sip calls through voip.ms fail (solution)

    At the risk of getting flamed… it can only be a configuration issue as once outside asterisk SIP is just SIP and TLS is just TLS. It took me 3 years to get a Nortel phone working on pjSIP. The answer is test, analyse the log file and repeat until you get the correct configuration.
  13. dallas

    QUESTION Best way to send calls to cell with DID CID

    It depends on where you are in the world, but in most western countries it will be somewhere between difficult and impossible with the current laws in relation to spamming of CallerID.
  14. dallas

    SOLVED Incredible PBX 2020 Raspi - Distinguish whether the call was answered by the sip extension or mobile in follow me?

    I have tested this again today and if you remove the extension from the follow-me group and use the ringall strategy it does work. I added and announcement and that announcement was played before the call was forwarded but not played when extension answered.
  15. dallas

    SOLVED Incredible PBX 2020 Raspi - Distinguish whether the call was answered by the sip extension or mobile in follow me?

    Have you tried this? The help for the Follow-Me List and Announcement might help you achieve your objective.
  16. dallas

    SOLVED CISCO 7841/INCREDIBLE PBX

    From what I've seen here, unless you are installing a large number of handsets you are better off provisioning them individually.
  17. dallas

    TIPS How to setup trunk with less info

    You need to talk to them or check their website for that information. I can’t access their website from my country. I can only find a DNS record for 103.15.140.151.
  18. dallas

    TIPS How to setup trunk with less info

    You need to enter all the IP addresses that sip.icctalk.com use to send you calls.
  19. dallas

    TIPS How to setup trunk with less info

    These are correct. What do you have in pjsip Settings>Advanced>Match (Permit)?
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top