Search results

It turns out no its not. It is on 5060. I figured that out about 30 seconds before I saw your message. I am used to pjsip being on 5061. Apparently vitalpbx defaults pjsip to 5060. Thanks for the help.

I have moved everything onto the same vlan to make troubleshooting easier. SNGrep shows the following: If I expand the above entry I see the following: The above entries repeat over and over again. If I am reading this correctly asterisk never responds. Thoughts?

I moved the vitalbox and phones onto the same vlan, so I could eliminate routing and firewall rules. For testing purposes, I have disabled fail2ban and iptables (This pbx is behind a hardware firewall). I am still seeing the same behavior as above. I am convinced there is something I do not...

Agreed. I was doing this for testing. I have an old pbx and phones running on the main lan. I was trying to keep the old system running while I get the new system up and running on the new Vlan. The plan was once the new pbx was in production I would move everything to the new Vlan. I think I...

Yes, I can see traffic via tcpdump getting to the pbx but the only return traffic from the pbx is icmp. The icmp traffic is confusing to me. I have never looked at packet dumps during a registration to know if this is normal.

I have a new install of VitalPBX that I want to have on a different Vlan than the phones. Is there anything special I need to do to get the phones to register? I have setup the phones and extensions like I normally would do using freepbx but I cannot get the phones to register. SNGrep shows the...

I got VitalPBX up and running and I am in the process of getting it configured. In the instructions of the NV article to get TTS working it says to make the following symlink "ln -s /usr/bin/pip3 /usr/bin/pip". This does not work for me as pip in installed in /usr/local/bin not /usr/bin. I do...

Thanks Ward. I will give it a try once I have the initial configuration setup. I have an 8GB RPI 4 waiting for something to do!! :)

I think my real question is how to do that with VitalPBX? As long as there is a way, I will look into it when I get one up and running. I just wanted to be sure I wasn't looking for something that does not exist. I had pretty much written off VitalPBX because the last I looked at it (several...

Can Bulkvs be used for the dips with other trunk providers such as Skyetel? I have used BulkVS in the recent past but had to switch due to them dropping calls for no apparent reason.

Does VitalPBX support Callerid Superfecta?

Thanks @wardmundy . That is what I suspected. The MD5 is what I really needed so I could be sure.

Hi, I tried to download the Incredible PBX 2027 image for the RPI this am and it is getting flagged as malicious. I got the link from https://nerdvittles.com/a-new-incredible-pbx-2027-image-for-the-raspberry-pi/. The link in the article for the download is...

Hi, This is a weird one. I have a working Yealink T46S with a Jabra Engage 75 headset connected to Ipbx-2020. I wanted to add a 2nd phone and Engage 75 headset. We decided to try the Yealink T48s with the Engage 75. We did a reset on the phone and headset as well as made sure the firmware on...

Not sure if this is phone specific or not but I have a Yealink T46S that I use on WIFI a couple of times a year when I am on vacation. I seem to remember that the VPN dropped and reconnected itself when necessary.

Years ago I used Flowroute for both origination and termination but since the got bought out service with them deteriorated and I moved all of my DID's away from them. I was keeping the account open as an alternate route for Outbound calls. But to add Insult to injury, they even are going to...

Whooo!! The port is what I was missing!! Skyetel's documentation has multiple errors in it. That is what i get for reading the docs. :) If anyone else is trying to get a pjsip trunk working using Skyetel's docs @...

Yes, I even added all of the inbound ip addresses listed @ https://support.skyetel.com/hc/en-us/articles/360041173493-Skyetel-IP-Addresses to both the match permit and iptables.

Hi kenn10, Thanks for the pointer. the from-pstn-e164-us looks like the solution I need however I cannot seem to get it to work. Since I was using the trunks that came pre-configured with the system and they were using chan_sip, I decided to create a new pjsip trunk as described @...

Hi, I have ported several of my did's to Skyetel. When they were with my previous provider the incoming CID was 1+the number. As a result all of my numbers in the asterisk phone book are in the form of 1+the number. Skyetel is sending the incoming CID without the 1. I also have DID's with...