Search results

  1. JasonH

    Error when forwarding voicemails

    Thanks. The "voicemail" and "default" directory permissions were incorrect, so I've set them as you said. I'm no longer seeing the "config load failed" message! Yay! But the voicemail forwarding is still not working.. Boo.. And I'm not seeing any additional debug messages that look like...
  2. JasonH

    Error when forwarding voicemails

    Hey guys! I'm having some error when forwarding voicemails through the voicemail system. It all sounds like it's working from the phone, but the voicemail never arrives in the recipient's vm box, and the new voicemail email has an attachment of 0 bytes. I turned debug on full throttle, and...
  3. JasonH

    Please help! update-source16 killed system

    Fixed I got it to stop dahdi. For some reason I had to run it from /etc/init.d directory, and the run ./dahdi stop. It didn't wipe out my asterisk config, it wiped out my dahdi config. At least, after the reboot when I ran dahdi_tool it only listed 1 of my cards, and it was unconfigured...
  4. JasonH

    Please help! update-source16 killed system

    This is what the script says: *********************************************************** * Dahdi is still running! This script cannot continue! * * I am going to turn off Dahdi and reboot the system now * * Please rerun update-source16 once the system reboots to * * continue...
  5. JasonH

    Please help! update-source16 killed system

    I tried running update-source16 on my asterisk 1.6 box. It said that Dahdi was still running and it was going to disable it and reboot. It rebooted and I reran update-source16, and it does the same thing. Now my system doesn't load dahdi or any of my configs. Is there a way to manually shut...
  6. JasonH

    Will update source wipe out confs?

    I'm trying to figure out if running the update-source16 (Ast 1.6) will wipe out any configuration files? Will I need to rerun anything like dahdi_genconf afterwards, for instance? Or should it be relatively seamless? TIA
  7. JasonH

    SIP Phones randomly act like they're on DND

    I am running Asterisk 1.6.1.10. The server is internal to our network and we have about 40 extensions with SIP hard phones. There are issues with SOME extensions where you can dial the extension (both internal dial and from external) and it rings, but then sometime later it goes straight to...
  8. JasonH

    Looking for PIAF/Asterisk consultant in San Diego, CA

    We are looking for a part-time consultant to assist with the set-up and maintenance of our in-house Asterisk PBX system. We are looking to increase the overall reliability and scalability of our existing system, which is critical for interacting with the students, teachers, and partners that...
  9. JasonH

    Call queue entry message repeats forever

    We've had an issue happen twice now with our call queues. When you try to call in, the greeting message just repeats and the user never gets in to the queue, and isn't forwarded to the fail-over destination. Opening FreePBX and forcing it to reload fixes it. This is what I found in the log...
  10. JasonH

    Dropped Calls After 15 Minutes

    I had this issue as well, and it turned out to be a SIP session timer issue. Since you're at that exact time limit, I would suspect the same thing. For me it was a setting in our IP phones that I had set it not to use timers. Then I added this line to the sip_custom.conf file...
  11. JasonH

    Strange issue where queue drops 2nd caller after 20 seconds

    Anyone know what this is about? [2010-04-23 14:13:42] WARNING[7202] func_db.c: DB requires an argument, DB(<family>/<key>)
  12. JasonH

    Strange Hangup in mid-call

    Found a possible solution. In sip_general_custom.conf file, add the line "session-timers=refuse". This will disable any call timers from interrupting the calls. Someone may need to know this if they're running 1.6.1.10. Apparently it has been fixed in 1.6.2.
  13. JasonH

    SUGGESTIONS IP Phone Recommendations

    I have the Grandstream BT-200 phone, and it can do exactly that. It's cheap ($60). I actually really like it, aside from the pretty basic display.
  14. JasonH

    Queue not using settings in FreePBX

    Solved It! So, I didn't notice this line from the Asterisk config queues.conf page over at voip-info.org: roundrobin: take turns ringing each available interface (depreciated in 1.4, use rrmemory)It'd be nice if "roundrobin" wasn't an option on the queue strategy any more since it no...
  15. JasonH

    Strange Hangup in mid-call

    Okay, this is a weird one. I have a person on a SIP phone connected to my PIAF server. When she makes an outgoing call, about 15 minutes in to the call, the call is hung up and she hears a busy signal. I just grabbed the log of her call that disconnected, and it is as follows: Dialing out...
  16. JasonH

    Queue not using settings in FreePBX

    So I've been playing around with this some more. It appears that the queue IS using the settings, however, it doesn't like being set as round-robin. Every time I set it as round-robin (in FreePBX), it sets itself as rrmemory (as seen in the CLI). It also doesn't appear to care about setting...
  17. JasonH

    Queue not using settings in FreePBX

    Solved: Queue not using settings in FreePBX Hey guys, I'm having a weird issue with queues. First off, I'm running Asterisk 1.6, FreePBX 2.6.0.1 and Queues v 2.6.0.3. I have a queue set up in FreePBX (ext 5100). It is set up with round-robin ring strategy, with the following static...
  18. JasonH

    Flash/flashhook doesn't register in CLI

    Ok, given a new day and a fresh look, I've fixed it. I ran dahdi_tool and watched as the RX flags changed when I hit the flash button on my phone. So it appears the hardware is registering it properly. I've found posts that say to put the following lines in the zapata.conf file: [channels]...
  19. JasonH

    Flash/flashhook doesn't register in CLI

    I have some analog phones connected to Rhino RCB8 FXS ports. I'm not able to get the flash button on my phone to do anything. When looking in the CLI, it doesn't show any action going on when I press the flash button either. I've been scouring the google for stuff on flashook timeouts and...
  20. JasonH

    Outbound through PRI failing

    Thanks guys! I called and created a trouble ticket with the telco on Friday. They called me this morning and verified the number format we are sending them, and said it should be working. I tried a call out, and it did! :D I'm not sure what they did or didn't do. Just happy it works...
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top