Search results

What happens if I install this on a pi 3a? What breaks?

I just plugged the USB drive in a windows PC, deleted all partitions and created a new single FAT32 formatted partition. You could probably use it as is fresh out of the package since they typically come pre-formatted with FAT32. Sure, you can also format the drive under Linux if you'd find...

This isn't meant to be a detailed tutorial, but rather a quick set of notes that others (and my future self) can follow. I have Incredible PBX 2020 running on a Raspberry Pi 3B. It's been running from a microSD card for a while, but I'm worried about the card going bad eventually. I wondered...

My pleasure.

TL;DR IBM Cloud is withdrawing support for TLS 1.0 and TLS 1.1 across many cloud products and services. This does not appear to effect the voicemail speech to text add-on.:clap: I've been using the voicemail speech to text for a while and it works great in my low volume application. Recently...

Just confirming I found my PIAF 3.0.6.6 system was vulnerable to this "attack". Issuing the above changes via mysql closed the hole. For reference... PIAF Installed Version = 3.0.6.6 FreePBX Version = 2.11.0.43 Running Asterisk Version = 11.16.0 Asterisk Source Version = 11.16.0...

What kind of link does this create between the servers? Is the voice path encrypted?

http://pbxinaflash.com/community/index.php?threads/fcc-robocall-blacklist.17853/ Apparently it was good enough for Ward.

So the FCC is publishing a CSV file of undesirables here https://consumercomplaints.fcc.gov/hc/en-us/articles/205239443-Data-on-Unwanted-Calls. They say they are updating it every week. I manually edited and imported the current offering into my Incredible PBX but I'd like an automated way to...

While I fully support PiaF keeping consistency with their distributed apps, I often choose to replace sendmail with postfix (usually when I need to set up gmail as a smarthost). "apt-get install sendmail- postfix" does the trick nicely on debian based systems.

Those would work great if I were building this from the ground up on my own hardware, but in this case I am at the mercy of what images RentPBX has on tap. I could do a self install there, but I'd rather have a base that has already been tweaked to work with their VM environment. At their...

Well, RentPBX replied to the ticket I opened with them and it's not on their end. They suggested maybe PiAF is no longer supporting 2.x and suggested maybe trying 3.x. Is there a stable green release that is considered 3.x?

I'm starting up a new instance of PiAF green over at RentPBX. I'm following along on the "Getting Started with PBX in a Flash" over at http://nerdvittles.dreamhosters.com/pbxinaflash/ (tangent: what's the deal with links on that page that don't go anywhere?). I've installed traveling man 3...

I put together a new install of PiAF on a VM for further testing. It gives me the same results (no auto answer) so I think I can rule out the hosting provider as the source of the problem.

Hey tm1000, any chance you could look at my thread about my troubles with intercom/auto answer on a Polycom IP430 using OSS PBX End Point Manager version 2.11.7? It seems like Asterisk is sending the right commands, but the phone isn't auto answering. Do you know if there is there any way to...

-- Goto (sub-record-check,exten,1) -- Executing [exten@sub-record-check:1] GotoIf("SIP/502-00000201", "0?callee") in new stack -- Executing [exten@sub-record-check:2] Set("SIP/502-00000201", "__REC_POLICY_MODE=dontcare") in new stack -- Executing [exten@sub-record-check:3]...

== Spawn extension (ext-did, s, 3) exited non-zero on 'SIP/502-00000200' == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Executing [*80501@from-internal:1] Goto("SIP/502-00000201", "ext-intercom,*80501,1") in new stack -- Goto (ext-intercom,*80501,1) -- Executing...

voip*CLI> core set verbose 6 Set remote console verbosity to 6 == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 -- Executing [7777@from-internal:1] Macro("SIP/502-000001ff", "user-callerid,") in new stack -- Executing [s@macro-user-callerid:1] Set("SIP/502-000001ff"...

I'm trying to get paging/auto answer/intercom working and am running into dead ends. I've searched the forums and see other people trying to do the same thing, but none of the suggestions seem to apply to my situation. I'm running a hosted PIAF version 3.0.6.5 at RentPBX (which I am very happy...

I've got an SL instance of 3.0.6.5 on rentbox that I have been very happy with in general. ────────────────────SYSTEM INFORMATION───────────── │ Asterisk = ONLINE | Dahdi = ONLINE | MySQL = ONLINE │ │ SSH = ONLINE...