Search results

Hi Edisoninfo, Just curious if you ever pin pointed anything down further? We have an install of 6735i's from back at the end of November where these phones will randomly go into web recovery mode. We have replaced our PoE switch with other models and they still will randomly go into Web...

Hello there. Just curious if you were able to get ConnectWise working as a lookup source? I have it enabled and have debugged a few numbers, however the tested numbers never pull anything back yet I do not see any error messages either. Here is some of the output from Testing a number...

Simply utilize the user-custom.prf for all of your remote extension numbers. Read the commented files in user-custom.prf for details. Make your vlan overrides there. We typically use this to hardcode our blf mappings for operator panels. This way if we have to run an "./apply_prf -r ALL" our...

+1 OSLEC is far superior to the built in MG2 cancellation. Wish it was the default for those of use that still deal with analog.

Hi Tom, I sent you a PM with a tracking number. I meant to send some things to you back in July. On it's way is a Aastra 6731i, Cisco 7941 with sip image, and Polycom 320. Thanks for all you guys do !!! Will

Went through this recently with Rhino I had the issue recently. Problem was that the Dahdi software echo cancellation was trumping the hardware echo cancellation on the card. Disable software echo cancellation. Here is what James at Rhino support told me... Go in to /etc/dahdi/system.conf...

We've had pretty good luck with the bluetooth functionality. Which model bluetooth headset are you using?

What do you mean "will not help to get latest firmware"? Don't you simply go to this link to get the latest firmware and then flash it? http://www.grandstream.com/firmware/GXW40xx_HT50x/Release_GXW4024_1.0.5.5.zip

Hi Guys I'm looking for feedback from anyone that has used the grandstream GXW-4024 (24 port FXS). We have an install that will have to keep the majority of analog extensions. Has anyone used these with their PBX in a flash systems. I was set on using Xorcom Astribanks (chaining a few...

It may be the phones and not the astribank.... However first thing you need to do is install OSLEC for echo cancellation... cd /usr/src wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.28.tar.bz2 tar xjf linux-2.6.28.tar.bz2 mkdir /usr/src/dahdi/linux/drivers/staging cp -fR...

Get you a Dell T610 and change it to Rack mode. They are great boxes and have plenty of expansion slots. Look under the Dell Server Deals section on the dell website. By default they come with a REAL Raid Card for raid 1. A little over a 1,000 dollars or add dual powersupplies for $249 more...

You still need to do the following.... 2. Download fxload from Xorcom: http://updates.xorcom.com/astribank/...1-5xr.i386.rpm 3. Install fxload package: "rpm -i /usr/src/fxload-2002_04_11-5xr.i386.rpm"

Tom I don't think you are whining at all.... You guys do a lot and do not expect anything in return. Here what my company can donate... Cisco 7941, Polycom 320 (good luck with it), Aastra 6731i. PM me your shipping address... It would be great if someone could donate a Xorcom unit. I must...

Tom is there anything specific that you guys need? Yealink or Aastra Phones? (specific models?)

Welcome to the forums. As you've stated there are a number of different combinations. I've sent you a pm.

I've got a site that uses an Astribank. We've been very pleased with it. The unit was configured with a PRI interface, 16 FXO ports, and 8 FXS ports. Everything runs rock solid. We use the PRI for our main pstn connection, FXO ports to interconnect with the Hospital's old Avaya systems and...

Interesting read Take a look here... This is based off the original flip1405 script http://linuxnotes.us/archives/268

Looks like you found your issue..... Call Rhino....

It is the same thing... you can get that information anytime.

From the command line issue dmesg |moredmesg |more Then go through the output by hitting the space bar (goes to the next page of output) until you get to the portion that talks about dahdi and your r1t1. This output will let you know if your hardware echo cancellation is working. So you have...