Search results

Logging this information is a great tool. It's my understanding that when a call is placed two channels are used: The "local" channel and the "bridged" channel. Please correct me if I am wrong but this is only logging the "local" channel stats. I'm trying to find a means to log the stats from...

I am in the process of adding (5) of this in one of our satellite offices. All in all I'm very happy with the features, look and feel for the price point. There are some shortcoming. For example, you can program one of the 6 line key as "Park Call" but the LCD doesn't display the keys while on...

My inbound trunk settings are the same as yours. Did you set the ip address in the externip= which gets written into sip.conf? You need to do this if you are behind a router and using NAT. I always put a second NIC on my machines to avoid the NAT issues. This is especially handy if you intend...

I have a system in Atlanta, GA which has huge local calling area. To complicate matters, the local exchange (NXX) coexists in multiple area codes (NPA). The carrier requires that ALL local numbers be dialed with 10 digits AND all toll calls be dialed with 1+10 digits. The end user can not...

That's because the module isn't writing the changes to system.conf. The parameters which were created from dahdi_genconf are probably good enough for you - but the module is indeed broken. This module is also going to need to hook into restarting dahdi and reloading asterisk - not exactly trivial

Thanks, At least now I know I'm not crazy!

Asterisk version is 1.8.8.0, DAHDI Config module is 2.9.0.1

After making changes using the module web interface, /etc/dahdi/system config does not change. Where is the module storing changes for span line buildout, timing, etc? Is the module broken - do I have to hand edit system.conf? It appears that other changes are correctly stored in...

Thanks, I will test drive it tonight!

It looks like the variable substitution {$line} is not working in the SPA962 template: {line_loop} <Display_Name_{$line}_ ua="na">{$displaynameline}</Display_Name_{$line}_> <!-- If BLF then set this to the BLF --> <Short_Name_{$line}_...

I added device/user 962 in FreePBX. I used EPM to create a config for a Linksys SPA962, The generated spa000e08ffffff.xml file is missing the line settings (for ext 962) so the phone configures without any lines.

OK, I figured this out. The ntp time server has to be entered in the "Globals"

Also the SNTP field is not populating. Where is this value for the ntp server being pulled from? It's blank in the generated server_317.cfg file tcpIpApp.sntp.address="{$network_time_server}"

OK, Why isn't {$mwi_subscribe} populating with the extension number? Could this be due to "device and user" mode?

MWI on Polycom IP 501 I'm trying to get the MWI working on Polycom IP 501's Do I need to create a separate template for each extension? I have tried to edit phone1_317.cfg. No matter what value I put in the <mwi msg.mwi.1.subscribe="your_extension" it is blank in the 0004f204d291_reg.cfg...

Examples attached

Many thanks for your hard work. HUGE!!!! Using FireFox 9.0.1, End Point Manager shows the red and green buttons only for a second as the page loads and then the colors disappear. FreePBX Connectivity Menu Item ->End Point Template Manager loads page titled "End Point Configuration Manager"...

Do a quick check. From you asterisk server: telnet ip.address.of.phone 80 (You may have to send a CR once after connected). You should see the phone reply with some HTML.

Great job on these scripts Aastra! I have a few suggestiions/issues. I have a few remote phones that register over the public Internet. For security reasons, it is desirable to have the xml over VPN. The setup-xml script that generates the aastra.conf file does not pull the XML_SERVER IP...