Search results

  1. GregKeys

    NEED MORE INFO Eth Device is em1 not eth0, issues installing PIAF-Green

    I wrote that post, and, as I recall, PIAF installed just fine, it was just the FreePBX status screen that did not show correctly. Everything worked, it just was a minor irritant. Please elaborate on what you are seeing, and what kind of errors you are getting.
  2. GregKeys

    SOLVED Help, I can't get my Vitelity Trunk to work.

    Show us your inbound routes, outbound routes. In the inbound call you show: Called SIP/2001 -- Got SIP response 486 "Busy Here" back from xx.xx.xx.xx:37083 -- SIP/2001-0000000a is busy That "looks" like the pbx tried to connect to 2001 and 2001 replied busy....... Show us the ext 2001 config...
  3. GregKeys

    TIPS Polycom 301 - Phone from Hades?

    I received a batch of phones from ebay that were listed as Polycom IP501's. 11 of them were loaded with MGCP for Cisco. They would not load the latest firmware for SIP, and even with a slightly older revision that would load, I had nothing but grief with them. There was nothing to indicate...
  4. GregKeys

    SUGGESTIONS Tools for monitoring bandwidth hogs

    Using nagios with centreon at the moment, but I just set up a Zabbix box a week or so ago. I have only gotten a couple sites configured in it so far as I have been building device templates etc, but I really like what I have seen so far. With 40+ sites, 1800 users, servers, printers, switches...
  5. GregKeys

    NO JOY Strange IAX trunk behavior - unreachable

    I have multiple servers on a vpn network, interconnected via iax trunking. This has worked flawlessly for months. Now, I have one server the had first one trunk, now 4, showing unreachable. This server is on the same subnet that I am, and I can reach the web interface of the servers it says...
  6. GregKeys

    TIPS Bulk extensions not working

    If you export from one system, you must hand edit and set the action for each to 'add' before you attempt to import. I use bulk extensions on every system I build (green, FreePBX 11, etc).
  7. GregKeys

    TIPS Dell PowerEdge T20 Server

    Dell T110's have an issue where the ethernet port gets named em1 rather than the traditional eth0. This is annoying and causes issues with anyhrting looking for eth0 (like the freepbx status screen). If that happens withj this Dell server, here is the fix: After install is complete the system...
  8. GregKeys

    QUESTION Ghost in the machine?

    Super Double Secret Project........ Pant..... Pant..... Pant......
  9. GregKeys

    NO JOY MeetMe not working on new install

    Conferences must be preconfigured, much like extensions. Go to applications, conferences, create a conference and set the options. Unfortunately, there is no replacement for the meetme web interface. If anybody knows of current software that allows web based control of conferences similar to...
  10. GregKeys

    NO JOY combination of callback and calltrough

    As an old hand, with brain cells dwindling into atrophy, I am a bit confused. Can you state your objective in plain english, without any technical info on trunking etc? It sounds like you want to call inbound with your cellphone, disconnect, have PIAF call the cell phone back and connect to a...
  11. GregKeys

    NO JOY Stand alone Voicemail platform

    you might find this to be some help: http://www.michaelrice.org/blog/wordpress/?p=79
  12. GregKeys

    QUESTION One way audio - answered many times but...

    Install NeoRouter on the PBX. Install NeoRouter VPN client on the PC's of the volunteers that have connection issues and use X-Lite pointing to the 10.0.0.X address NeoRouter provides for the PBX. No NAT, no one way audio :)
  13. GregKeys

    TIPS TeleYapper on green?

    I can't imagine any reason why it would not :)
  14. GregKeys

    TIME MACHINE The Great Crash of 2013: Forum changed since?

    And some of us are just crazy busy :)
  15. GregKeys

    FOOD FOR THOUGHT Grandstream and OSS Endpoint Manager

    Yea, tweaking the OSS EPM is a little beyond me without some serious research. The reboot-snom issues a sip notify reboot command that the GXP2100 responds to. If you want a Grandstream reboot command, it is just a case of adding it to sip_notify_custom.conf, duplicating the format of the snom...
  16. GregKeys

    FOOD FOR THOUGHT Grandstream and OSS Endpoint Manager

    Does anyone out there know how to get the reboot function of the OSS endpoint manager to work with a Grandstream GXP2100? I managed to find some old info on the issue, but it does not really help :)
  17. GregKeys

    NEED MORE INFO IAX Trunks from Multiple PBX's to One Main PBX

    Can you elaborate on your concern? if you have just the iax port whitelisted only iax gets thru. When you say compromised, what do you mean?
  18. GregKeys

    TIPS OSS Endpoint Mgr and GXP2100

    My boss picked up a couple of Grandstream phones for testing. GXP2100 and GXP1450. I plugged them into the OSS Endpoint Manager and provisioned them with no issues. When I try to dial I get an error - Failed No dial plan rules matched. I know what the issue is, the default dial plan of { x+ |...
  19. GregKeys

    SOLVED PIAF-Green Unavailable

    If the Ethernet is built into the motherboard, post the MB info, brand, model, etc
  20. GregKeys

    SOLVED PIAF-Green Unavailable

    Verify that the box has a good Internet connection. Post the specs of the box, especially the Ethernet card.
Get 3CX - Absolutely Free!

Link up your team and customers Phone System Live Chat Video Conferencing

Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.

3CX
A 3CX Account with that email already exists. You will be redirected to the Customer Portal to sign in or reset your password if you've forgotten it.
Top