Search results

Text on the bill can be found here: http://frwebgate.access.gpo.gov/cgi-bin/getdoc.cgi?dbname=111_cong_bills&docid=f:h1258rh.txt.pdf

from the command line: mysql -h localhost -u root -p When prompted for password enter: passw0rd then type use asteriskcdrdb; then check table cdr; then repair table cdr; don't forget semicolon's

run a "check table CDR" repair table CDR Should be able to do that in PHPmyadmin

cool, glad it works out (saw your other posts about switching away from the 7940). I love mine

If a software has an "update" button and you press it, and it gives an error, it is in fact broken, so it needs to be fixed. Here are the steps: cd / wget http://prdownloads.sourceforge.net/webadmin/webmin-1.510-1.noarch.rpm rpm -i --replacefiles webmin-1.510-1.noarch.rpm

try turning iptables off and then playing with your phone. It will help. If i turn iptables on, my 7940 will no longer register

easiest way: setup pbiaf on a computer buy and setup an grandstream ht-502. unplug the phone cable end from the inside of your sbc box (short cable with a standard phone plug end). plug a regular phone cord from your ht-502 into any phone jack and thats it. the ht-502 would need to be near a...

service iptables stop set nat=no in the extension config if that works then its an iptables issue

I've tried testing inbound faxing, and with the SIP detection it doesn't really work, it eventually drops to my call group, i then transfer it to the extension, and it detects the fax and receives. So far it received 5/5 faxes. You need asterisk 1.6.2 to get SIP faxing working

Ok, so they register right? go to the asterisk cli and type asterisk -rv and then type sip show peers, it should tell you their all registered. (Make sure you see them all). You should also see their extern IP address and a status (ok, unknown, unreachable) You only need the externhost...

can you go into the command line ( asterisk -rvvvv) and do a sip set debug on

Can you post what ports you have forwarded? I would also add an externrefresh=120 under the externhost

i was really hoping this thread was about drinking

I'm using 3-8-12 as well with no problems

Yea, but I have other plans for the box as well. I'm a application developer (coldfusion) so a sandbox is always nice :)

do you have the updated queues module?

So i finally got a real server to run pbx in a flash on. i snagged an hp proliant dl140 from pacific geek for $95. i also got 4 gb of ram on ebay for $35, and i upgraded all my network to gigabit for $35. plus shelving, cables and what not the total was like $350 and i couldnt be happier. it...

can you post screenshots of your incoming route, trunk and the entension info? dont forget to remove passwords

do you have an inbound route setup?

Could just do remote extensions, you'd need to open port 5060 and make sure you read the security thread before doing so.