Search results

Not just the en_AU files. Same problem with downloading any of the sound language files, including the two English (US) ones that are not in the RPi installation image. Suspect they are not present on the ClearlyIP server.

You are not the only one.

I suspect that resistor was omitted because of a lack of understanding, rather than a deliberate cost saving decision.

"Enchiladas" means it isn't LITE.

Don't forget that Google will be collecting termination charges for calls coming in to GV numbers. I'm not saying that will cover the outgoing call charges and the cost of running their servers. Just that the net cost to Google may not be as high as you might initially think.

Be aware that dd reads the complete card you are backing up to a file and when restoring writes that complete file to the target card. Fine if restoring to the actual same card. However if you restore to another card which is smaller, even by 1 byte, it will fail. The size is the actual...

I cannot comment on whether firewall/security issues are the problem. I was answering your query about the necessity of configuring routes. Possibly you are misinterpreting the green dots against the extensions. I can have those illuminated even when the respective softphone devices are...

Routes are not required for extension to extension calls. I can call between two extensions (3cx Android softphones) on 3cx (Debian) on a CloudatCost server. (On the rare occasions that said server is up!!)

http://www.obitalk.com/forum/index.php?topic=12799.msg82139#msg82139

GV account on OBi1032 phone (not via Simonics). Callcentric number SIP registered on FreePBX. Analogue phone on OBi110 as extension 700 on FreepBX. From OBi1032 I rang the Callcentric number and answered it on the analogue phone. Then I hung up the 1032 while listening to the analogue phone...

Removing the forwarding is not what Brian told you to do.

1. It is generally accepted that the echo on SPA3000 is worse than that on OBi110. Not surprising as the OBi is a later design than the Sipura/Linksys/Cisco unit and some members of the development teams worked on both. 2.. It is also known that most, if not all, of the "brand new" Linksys...

Not strictly accurate. They both support multiple simultaneous calls. The 202 can have 2 analogue phones plugged in to it and have separate calls on each of them. The 200 has a single phone port. eg the following can happen at the same time. 1. a call in progress between a plugged in phone...

Nice simple, clean user interface but two issues quickly became apparent for my home use. 1. Only one SIP trunk in the free edition. 2. No support for time or day based outbound routeing. (My telco package here in the UK includes free calls over the PSTN line at weekends.) Looks like I won't...

Has anyone managed to get the v3.1 firmware which the x100p site says caters for the new GV authentication method? I couldn't find a download link, only a sentence or two with an email address to which one could request v3.0 firmware. Such request to include current firmware version and licence...

1. I cannot comment on other networks in arztde's list of providers known not to work with IPKall but the reason shown against sipgate is incorrect. Sipgate.co.uk does not work with IPKall because the former blocks all incoming SIP calls except those from their co-operation partners telio.no and...

I would prefer to be able to completely disable the router function and (with the WiFi switched off) just use the ETH2 port to replace the one on the main router taken by the cable from ETH1 on the JS200-FX. It is possible to run and configure the JS200-FX using only the ETH1 port. But first...

I can confirm the box readily connects to other ITSPs. I have had no problem with registering to Sipgate UK, Ekiga, IPPI, Localphone, Sipsorcery and PBXes. getonsip took a few attempts as it seems to need more than the usual trio of address, username and password.

No, I haven't had such an email. And as my PSU is running from 230 volts I'd be even more concerned about a possible problem.

Thanks but I already know all that. I'm not asking for a workaround. I've had dozens of pieces of kit through my hands and this is the first one that doesn't appear to offer the DHCP or static option in client or client bridge modes. It is there in AP mode. My ISP has supplied millions of...