Search results

Provider is Vitelity. Not sure what command to run for the cli. First time ever having an issue like this with anything asterisk based.

Currently setup the Turnkey incredible PBX for Xivo on an raspberry pi 3. Outbound calls seem to be working fine. But we have some troubles with inbound calls when we answer the phone. The phone continues to ring, even though we tried to pick it up. First time I've ever seen anything like...

I just tested it to be sure. Outcalls worked as well.

I cannot say specifically for the T46G, as I have a T48G, but it seems that you can do it. Just setup the keys in the Users section and it may work. In my case, after setting up the keys in users, I had to go to devices and press the Synchronize button (yellow up, green down arrows) to push...

If you are using Xivo 16.10 you might need to synchronize the device after making config changes. I know my changes to the keys were not getting pushed to the device, so I had to manually synchronize them. IPBX Settings > Devices: Click on the Arrows (yellow up, green down) for the specific...

I've been double checking settings from: http://nerdvittles.com/?page_id=18278 as I setup my rpi3 for xivo. I had a question about the context for the outbound sip trunk configuration. Should it be: Default (default) [as shown in the tutorial] Outcalls (to-extern) [makes more sense for...

Well I did some more testing last night. It appears that when I auto-provisioned, the line1 account was attempting to connect to an IP on a different sub-net, thus registration was failing. The same IP was found under Configuration > Provisioning > Template Line > Registrar Main Currently, I...

I decided to try to factory reset the phone to see if that would help. Unfortunately, I cannot get auto provisioning to work right. I was trying to follow: http://documentation.xivo.io/en/stable/administration/provisioning/basic_configuration.html# skipped DHCP server setup on the xivo box --...

701 was the incrediblepbx default; which I left alone. I created 5 total users / lines: 702 = line for the T48G 703 = line for future use -- not connected to any device at the moment. 704 = line for Yate Client soft phone 705 = port 1 on a Cisco SPA112 -- currently empty, but there if we need...

I have nothing entered in the networking tab. No external IP or Local Network set. I also use Vitelity and can make outbound calls without issue. My Yealink T48G is exhibiting the same issue receiving calls though; they all go immediately to voicemail like the line is in use. I have had...

I did just try both rebooting the phone and server and it acts the same way.

I am setting an incrediblepbx-xivo.ova based virtual machine. I setup my trunks and they appear to be working correctly. I setup a user, line for a Yate client softwork, which appears to beworking correctly. I setup a user, voicemail, line, device for a Yealink T48G, which is having an issue...

General Tab: Name: flowroute-outbound [or whatever you want to label this; I don't think it needs to be account ID specifically.] Connection Type: Friend [rather than peer] Everything else looks perfect. I have gotten registration working with FlowRoute, just have to finish setting up...

When we dial into the PBX to check voicemail we are greeted with "Canadian Mail ... Mail Box". I'm confused why it says that, when the Time Zone setup was done for EST / Michigan. Regardless, I cannot find where/how to change that, any help is greatly appreciated. If it helps: Raspbian Wheezy...

I followed the guide listed below to install IncrediblePBX13-12.3 onto a Raspberry Pi B+ http://nerdvittles.com/?p=13790 It seems to be working on the B+ as well. I can make and receive calls just fine. I just can't listen to voicemail in the web browser. I can get into the GUI, see the...

Thank you. Out of curiosity, can the message be changed from within FreePBX? Without dialing in on a phone? I assume dialing is probably easier.

With our old phones, we had one voice mail inbox which both of our office staff could check. So my current setup is ~10 extensions for employees, 1 extension for voice mail (shared by the 2 office staff, and 1 ring group (all). The ring group destination is voice mail for the 1 extension...

Would an malformed outbound route CID cause this? I changed it to just our temporary number (until the transfer goes through) and it seems to work fine now. The call was picked up, and I could get through the IVR for the conference call. The CDR report showed it was picked up too. What is...

Trying to: connect to an a customer hosted conference call. Where you call in, type an entrance code, and get into the conference call. Problem: Could not connect. FreePBX CDR reports "NO ANSWER" under the disposition. Curious what can cause this, and what settings I need to check. This...