Search results

i no longer use follow me but today we set up ring group where one of the number is a mobile number. As the incoming strip off the country code, the number shown on receiving mobile caller ID is from another country. how can i do this? Incoming Call Number 65NXXXXXXX Ring Group List 500#...

Hi, i compare the setting with another working piaf in Amazon but i could not identify why there isn't a ring during outbound call. any idea? It's CentOS 6.5, Asterisk 11 and FreePBX 12 on HyperV 2012 R2.

i added mobile number to follow Me today. Since i've strip off the country code in incoming call, the local number on iPhone does not reflect as a local number. there is a prepend 65 for anyone dialling 8 digit number in trunk manipulation rules. is there a way to add only for follow me?

FreePBX backup - extensions, trunk, routes, all the configs, etc. I will have a spare server in Amazon. When this server goes faulty, i will import all the settings and back online in probably few hours.

Hi, How can i have automatic backup of PiAF configs sent to an email address every day on schedule? Adam

Hi, I've installed this version of A2Billing. How can i upgrade to the latest to protect from HeartBleed? http://www.powerpbx.org/content/a2billing-install-guide-v2

here's an update. It's still not working after I delete all and re-create one Outbound route. I create new extensions too and follow me was enabled by default. I can receive external and internal calls. I can no longer reach the extension after adding a mobile number to the follow me list. My...

Hi, With Flowroute, there first 2-3 seconds is silent before hearing a ring tone. I have another trunk where the provider added a fake ring before i can hear the actual (mobile or landline) ring tome. Can i also do this with PiAF? thanks Adam

hey guys, i wasn't aware there was a reply. my apologies. I tried to add the missing entry and the stripping is working properly. I changed from-pstn to from-trunk and it's still working. thanks a lot. Any idea how can i change this thread to Answered?

Hi, The pbx in T1.Micro EC2 is installed with CentOS 7, Incredible PBX 11 and FreePBX updated to 12.0.13. The endpoint-Yealink T28 is connected via a 1Gbps fibre ISP, connected at 30ms. The SIP trunk (G711) is connected to pbx at 4ms on average. Recently i noticed there is an audio lag in...

briankelly63: i did this and it does not work. here is the error. [custom-inbound1] exten => _X!,1,Set(CALLERID(num)=${CALLERID(num):3:10}) exten => _X!,n,Goto(from-trunk,${EXTEN},1) Error VERBOSE[1372][C-000060e2] netsock2.c: == Using SIP RTP TOS bits 184 VERBOSE[1372][C-000060e2]...

lgaetz and safa0786: thank you both! I've tried and this context works well. I will test further if the SIP provider does send + in the callerID. [custom-inbound] exten => _./_65NXXXXXXX,1,Set(CALLERID(number)=${CALLERID(number):2}) exten => _./_NXXXXXXX,2,Goto(from-pstn,${EXTEN},1) exten =>...

lgaetz: We need to know what format your CID is in, and what format(s) the country code is in order to figure out what specific dialplan you want? Me: The country code is +65 and i would like to see NXXXXXXX in the callerID instead of 65NXXXXXXX

thanks safa0786, i'll give it a try. It's a 8 digit and i am using SIP trunk. Is this the correct entry? [custom-inbound] exten => s,1,ExecIf($[ "${CALLERID(num):0:1}" = "Country Code" & "${LEN(${CALLERID(num)})}" = "8" ]?Set(CALLERID(num)=${CALLERID(num):1})) exten => s,n,Goto(from-trunk,s,1)...

billsimon - thank you. adding + does fix the issue.

I sign up flow route for PiAF outside US and advertising the local number. However, flow route add +1 and it became US number. This caused failure in calling a few toll-free numbers. I called FlowRoute and say that this is a config issue on my system. i changed to DIDlogic & Commpeak and it's...

hmm... your question ring a bell. i added a couple of Outbound routes. There is international and another for Lync Integration. Both does not have the local dealing rules, length of digit and country code prepend. Could it be that follow-me is trying to call through these "new" routes...

Hi, i would like to remove the country code from an incoming local call. This is not a number in the States. So what and how should i do it? Thanks Adam

in follow me, the initial ring is 6s, Ring time 30s and using ringallv2. Only mobile number with a # is in the list. I have 3 outbound route, this is for local numbers and the number does match. It was working fine previously till one fine day. So i tried disabling Custom Context (installed...

i'm interested too. What is the difference that i can benefit with Asterisk 12 upgrade?