Search results

I had a customer report that to me this morning as well. Not cool. I suggested they check out www.freepbxhosting.com as a replacement.

It all depends on what you are connecting to. Doing a SIP Trunk to CCM is easy enough if it is v5 or v6 or later. I can't speak to v4 as I've never touched it. Since Nortel is basically toast I am not sure I'd get involved if they are trying to keep that running. The real question is what...

No dahdi or timing... I got one to try for other reasons and then saw that I could reload as PiaF so I did. So far it seems fine. I worry about the lack of meetme...

It really depends on what you are trying to accomplish. FXO/FXS requirements aside, I go with: 1) Vyatta appliance w/support. 2) Peplink router w/2, 3, 4 WAN ports as needed. 3) Linksys E2XXX series seem OK on the low end.

Snom SRTP turned out to be easy. I was able to get a Snom 370 using SRTP with two lines and a download ( after certs were built): openssl x509 -outform der -in /etc/asterisk/keys/asterisk.pem -out /etc/asterisk/keys/cacert.der openssl x509 -outform der -in /etc/asterisk/keys/newcert.pem -out...

OK, so Google is my friend. http://zfone.com/prod_asterisk.html Seems worth trying.

Isn't zrtp limited to FreeSWITCH and zphone ? Tom, thanks for making me feel less alone... I too have been following zrtp, but with little support... it is hard to engage. TLS and SRTP is "supported" by quite a few different platforms. Most importantly Asterisk. I think if I can get a...

No one doing SRTP ? I guess I have myself to blame as I have been more or less absent online for the last 6~9 months. Accordingly I should not expect.... anything. No worries. I am a bit amazed that my original post has thus far not elicited one or two "Google is your friend" or "that has...

Since I started doing VoIP related work full time I am finding I have less time and energy to grind forward on certain... shall I say nagging aspects of VoIP in general. In particular TLS and SRTP. Sure, I was able do to the tutorial and get Blink to work with Asterisk 1.8.X ( a tip is that if...

Seemed to run OK. Did see one odd bit when it came up. No harm, just had not seen it before that I recall: Checking whether Flite is functioning... -= Info about application 'Flite' =- [Synopsis] Say text to the user, using Flite TTS engine [Description]...

Take a look at Ping Plotter for latency testing. Then read the section ( ping plotter help ) about VoIP testing. I have found Ping Plotter to be indispensable as a latency test tool. Bare in mind that Ping Plotter is a Windows program and I am not generally a Windows user. I have to run...

G0 vs chanels 1,2,3, etc..... It really depends on what you need to accomplish. You could put ports 1,2,3 in G0 and 4,5 in G1 or what have you. The suggestion of "channelizing" the ports was more for troubleshooting than anything else. btw, changing the verbosity of the CLI output could...

Looks like it is trying the wrong channels starts with: Executing [4016939@from-internal:8] Macro("SIP/1026-0000000b", "dialout-trunk,6,4016939,") in new stack hits trunk 3,4,5 and 6... I thought you mentioned you were plugged into 7 and 8... I think you might want to try a trunk...

Did you turn up the verbosity in the CLI? Did you turn up the verbosity in the CLI? "core set verbose 5"

Did you set up inbound and outbound routes ? Did you set up inbound and outbound routes ? Also, output from the CLI would be more useful.

The nic has to have a MAC I think you can change it to bridged in the proxmox control panel.

As a side note... I really like the responsiveness of the folks at RentPBX. I had a few minor issues caused by yours truly, and requests to reload the box for me we prompt. Also, upgrade and maint comm has been very good as well.

Did you try the FreePBX support board at www.freepbx.org ?

What is the Main PBX ? What is the main PBX and how is it connected to the iPBX ?

What happened to highness.org I would like to try this out, but the site appears down.... Any one got a local copy ?