Search results

I guess you misunderstood me, or I did not explain well. This is a fresh install of Incredible PBX2020 Public.. On the old regular IncrediblePBX I saw in the log files several attempts at breaking in to the system to the point that i think someone had configured an extension on the system. I...

Start over and do what? Install the regular IncrediblePBX 2020? I followed the tutorial, but something may have gone wrong during install?

Iptables does not show any IP addresses being banned. I also did not see anything in /var/log/secure other than my IP address being allowed.

That's the strange thing. Before I did the "add-ip" I was able to access the server from both of my locations via SSH. I am sure that those IPs were not in the firewall because I not not "messed with the Firewall". So it seems that it is wide open.

@wardmundy I thought that the Public version is more secure. Maybe I misinterpreted what I read. Is there a way to revert without re-installing?

Ok my syntax was wrong. I had to add my new IP address to be able to access the web interface. After doing that my inbound route started to work also. @wardmundy I had been running the traditional version of IncrediblePBX for a couple years until recently when I decided to switch to the Public...

My woes have now been compounded. It seems that my ISP for my home recently changed the IP of my internet connection so I cant not get to the web interface of the PBX. I can SSH to the PBX but I can not "add-ip". When I CD to /root and run that command I get response: -bash: add-ip: command not...

I had set up an Incredible PBX2020 Public and configured two extension. The PBX is on a VPS, so everything is remote to the server. I have an inbound route that points to an extension, that shows up as being registered, but when I place a call to one of my trunks there is no sign the it even...

I'm not in the US. Do you think that changing the context on the Outgoing settings to "context= from-internal" will solve my original problem? I don't really like to not have "qualify=yes" in my config.

Thanks @islandtech for your response. While reading through that document I realized that may I should be using "context=from-internal" instead of "context=from-trunk" in my Outgoing settings, and re-insert my "qualify=yes" In my case i'd like that each site be able to call out of the other...

@geopeterwc You had mentioned earlier in this post that I can possible share "DID". Currently we just use the inter-office trunk to call the extensions on each side. I'd now like to use the inter-office trunk to place calls through the remote IPBX. How exactly can I configure that?

I disconnected and reconnected the VPN a couple times last night and once I have confirmed full connectivity I checked that the trunks are working. I can call both ways. So I may have a solution. I noted that the trunk status under "Asterisk Info" is showing as "unknown." Aside from being able...

I reconfigured both IPBXs today by taking out the "qualify=yes" entry from the peer config. The system continues to function normally. Calls can be made either way without problems. I'll do some more test tonight trying to simulate the VPN losing connectivity and being restored. If that works...

@krzykat Since you don't use qualify, how would you know that there is a problem on the trunk? So we are kind of using reverse logic by not using qualify. I will try that in the morning and see if it makes a difference.

@geopeterwc I remember I had used that IAX document to configure my trunks. Actually I copied this config from a PBIAF Green system that I was running before I upgraded to IncrediblePBX2020. Had the same problem then, but I just telling myself that I need to get this system to work flawlessly...

@dallas Site A, with PBX IP 192.168.3.10. Yes I ping from PBX to PBX once the tunnel is re-established. @islandtech and @krzykat , I thought that using the the VPN tunnel provides a better path. If I were to just use the external IPs then there would be no need for the VPN. Like I said in my...

Bump. Any thoughts?

Hi all. I have two sites each with an IncrediblePBX2020. The sites are interconnected by an OpenVPN tunnel( a VPN Sever router at one site and a client router at the other site.) Below is the config I have at one site, but the other site has a similar config: Outgoing username=BMP-IAXuser...

Thank you guys for your inputs. This was a learning experience for me in that because I had used a tone setting before, it must have been correct to use it again. I am still trying to understand why the end equipment seem to have made the difference in deciding which tone setting to use, even...

I sent the capture to GS support and they were able to create a tone pattern for me. Strange thing is that all the entries are the same, dial tone, ringback tone, busy tone and reorder tone are all the same. It worked!!!!!!!!!!!! I can't believe it.