sinderlied
Member
- Joined
- Mar 7, 2011
- Messages
- 35
- Reaction score
- 0
Has anyone been able to get them running on PIAF? I purchased their system builder pack that includes them and the EPM so i could have visual vm, parking on yealink t48s. I'm most familiar with PIAF and it's running great, except for this. I get Loading Error ! on the phones when i try to access Visual VM, etc. Schmooze's tech support suggested it may be an apache auth or .htaccess issue and that i'd be better off switching distros. The system is running wonderfully and in production so i'm loathe to do that. I'm on an internal network so I disabled iptables (i had to use chkconfig because disable-iptables doesn't work) in case one of the ports were blocked. Any advice? Specs below.
PIAF Installed Version = 3.0.6.6 under *HARDWARE* x
x FreePBX Version = 12.0.9 12 x
x Running Asterisk Version = 11.12.0 x
x Asterisk Source Version = 11.12.0 x
x Dahdi Source Version = 2.10.0 x
x Libpri Source Version = 1.4.15 x
x IP Address = 192.168.2.102 on eth0 x
x Operating System = CentOS release 6.6 (Final) >< x
x Kernel Version = 2.6.32-504.1.3.el6.x86_64 - 64 Bit
PIAF Installed Version = 3.0.6.6 under *HARDWARE* x
x FreePBX Version = 12.0.9 12 x
x Running Asterisk Version = 11.12.0 x
x Asterisk Source Version = 11.12.0 x
x Dahdi Source Version = 2.10.0 x
x Libpri Source Version = 1.4.15 x
x IP Address = 192.168.2.102 on eth0 x
x Operating System = CentOS release 6.6 (Final) >< x
x Kernel Version = 2.6.32-504.1.3.el6.x86_64 - 64 Bit