Stupid Question: Does GV work for incoming and outgoing call without the caller id? thanks!
Yes I do have incoming and outgoing calls working w GVSIP ... just no callerID going out to the end points when dialing through GVSIP trunk
Stupid Question: Does GV work for incoming and outgoing call without the caller id? thanks!
thanks for the reply. I have been doing this with a pi2. I want to stick the card in a p3 I have available and see if I have any better luck.Yes I do have incoming and outgoing calls working w GVSIP ... just no callerID going out to the end points when dialing through GVSIP trunk
incrediblepbx13-raspbian8-gvsip.zip 2018-07-21 1.4 GB -- I found this updated version of the installer which i am very excited about trying. The set up was super smooth. I got everything done at work up to the point where one sets up the google trunk.
I hope I am permitted this one question.
Can the freepbx gui be used to set up the GV trunk with the outgoing and incoming routes?
I was able to get it working finally. To make the callerID work, I just put "My Name"<2014316165> in the outbound callerID.The gvsip trunk isn't able to be setup via the GUI. use this link to get the tar file and installer to build it for you...
http://nerdvittles.com/?p=26315
If you get callerID working please post!
After getting it working, I was able to get callerID to show up by inserting "my name"<8885551212> in Outbound Routes -> Route CIDThe gvsip trunk isn't able to be setup via the GUI. use this link to get the tar file and installer to build it for you...
http://nerdvittles.com/?p=26315
If you get callerID working please post!
cp /etc/asterisk/pjsip_custom.conf /etc/asterisk/pjsip_custom.conf.old
sed -i 's|voice.telephony.goog|64.9.242.172|g' /etc/asterisk/pjsip_custom.conf
sed -i 's|voice.telephony.goog|64.9.242.172|g' /root/gvsip-naf/install-gvsip
amportal restart
Link up your team and customers Phone System Live Chat Video Conferencing
Hosted or Self-managed. Up to 10 users free forever. No credit card. Try risk free.
Check your inbox!
We’ve sent you an email. Click on the button in the email body to verify your email address – (if you can not find it, check your spam folder).
Upon verification you will be directed to the 3CX setup wizard.